Dell V525W Configuring fax settings using the fax software, Using the Fax Setup Wizard in Windows

Faxing		77
	From here	You can
	2‑Sided Faxes	• Set the printer to print incoming faxes on both sides of the paper.
	Dialing and Sending	• Set your fax name and fax number.
		• Adjust the dialing volume.
		• Set the dial method, redial time, number of redial attempts,
		dialing prefix, and fax sending speed.
		• Convert sent faxes into modes that receiving fax machines
		recognize. Otherwise, such faxes are aborted.
		• Enable error correction during transmission.
	Fax Blocking	Block unwanted incoming faxes.

Configuring fax settings using the fax software

Before you begin, make sure that:

•The printer is properly connected to the telephone line.

•The printer is turned on and connected to the computer.

•The printer is not in Sleep mode. If the printer is in Sleep mode, then press to wake up the printer.

Using the Fax Setup Wizard in Windows

1Click or Start.

2Click All Programs or Programs, and then select the printer program folder from the list.

3Click Printer Home > Fax > Set up the printer to fax. The Fax Setup Wizard opens.

4Run the Fax Setup Wizard. Make sure you select the correct telephone service and connection. The wizard configures optimal fax settings based on your connection.

Note: If you want to configure the advanced fax settings, then from the Printer Home, click Fax > Configure the advanced fax settings. This launches the Printer Setup Utility.

Using the Printer Settings in Macintosh

1From the Applications folder in the Finder, or from the Finder desktop, double-click the printer folder.

2Double-clickPrinter Settings.

3Configure the fax settings using the printer software.

To view the help information for the fax software, click Help or .