Console and operating system support matrix for Dell Server Deployment Pack
The following table provides information about the operating systems supported by Dell Server Deployment Pack for Configuration Manager.
Table 1. Compatible operating systems supported by Dell Server Deployment Pack for WinPE
Configuration Manager | WinPE Version | Operating System Deployment | |
Version |
|
|
|
|
|
|
|
Configuration Manager 2012 | 3.0 | • | Windows Server 2008 |
|
| • Windows Server 2008 R2 | |
Configuration Manager 2012 | 4.0 | • Windows Server 2008 R2* | |
SP1 |
| • | Windows Server 2012 |
Configuration Manager 2012 | 5.0 | • Windows Server 2008 R2* | |
R2 |
| • | Windows Server 2012 |
|
| • Windows Server 2012 R2 | |
Legend:
* — For Windows Server 2008 R2 support, visit support.microsoft.com/kb/2853726.
Distributed Configuration Manager setups on multiple primary site servers
You can install DSDP on multiple primary site servers. While installing DSDP on the primary site servers, ensure that the versions of DTK and OpenManage used in the CAS and all primary site servers are the same.
Following are the limitations of the installation.
•If DSDP is uninstalled on primary site server 1 where you have imported DTK, you cannot use the existing boot images in the primary site server 2 or create boot images in it. Reimport DTK from the primary site server 2 to create the boot images. The site server where DTK is first imported, serves as the source for the boot image driver.
•You can import the OpenManage Driver for a particular server model only on one primary site server. This server serves as the OM Driver source for other primary site servers.
•If two primary site servers exist, four Dell packages are displayed in the Configuration Manager console. Of the four packages, two are the original source and the remaining two are the instances from the second primary site.
6
