Environmental

Temperature:

Operating

10° to 35°C (50° to 95°F)

Storage

–40° to 65°C (–40° to 149°F)

Relative humidity

20% to 80% (noncondensing)

Maximum vibration:

 

Operating

0.25 G at 3 to 200 Hz at 0.5 octave/min

Storage

0.5 G at 3 to 200 Hz at 1 octave/min

Maximum shock:

 

Operating

bottom half-sine pulse with a change in velocity of 20 inches/sec

 

(50.8 cm/sec)

Storage

27-G faired square wave with a velocity change of 200 inches/sec

 

(508 cm/sec)

Altitude:

 

Operating

–15.2 to 3048 m (–50 to 10,000 ft)

Storage

–15.2 to 10,668 m (–50 to 35,000 ft)

System Setup

Overview

Use system setup as follows:

To change the system configuration information after you add, change, or remove any hardware in your computer

To set or change a user-selectable option such as the user password

To read the current amount of memory or set the type of hard drive installed

Before you use system setup, it is recommended that you write down the system setup screen information for future reference.

NOTICE: Unless you are an expert computer user, do not change the settings for this program. Certain changes can make your computer work incorrectly.

Appendix

119

Page 119
Image 119
Dell U7021, WHL manual System Setup, 119, Environmental, 10 to 35C 50 to 95F