Dell U7021, WHL manual Connecting Two Monitors With VGA Connectors

7Select the color you want, and press <Enter>.

8Press <Esc>, and press Save and Exit to save the new front-panel light color setting.

Connecting Two Monitors

CAUTION: Before you begin any of the procedures in this section, follow the safety instructions located in the Product Information Guide.

NOTE: If you are connecting two monitors that have VGA connectors, you must have the optional DVI adapter. If you are connecting two flat-panel monitors, at least one of them must have a VGA connector. If you are connecting a TV, you may connect only one monitor (VGA or DVI) in addition to the TV.

NOTE: See the documentation that came with your TV to ensure that you properly configure and connect the TV.

If you purchased a graphics card that supports dual monitors, follow these instructions to connect and enable your monitors. The instructions tell you how to connect either two monitors (each with a VGA connector), one monitor with a VGA connector and one monitor with a DVI connector, or a TV.

If you purchased a graphics card that has two DVI ports instead of a VGA port, use a DVI-to-VGA adapter to use VGA.

Connecting Two Monitors With VGA Connectors

1Follow the procedures in "Before You Begin" on page 67.

NOTE: If your computer has integrated video, do not connect either monitor to the integrated video connector. If the integrated video connector is covered by a cap, do not remove the cap to connect the monitor or the monitor will not function.

2Connect one of the monitors to the VGA (blue) connector on the back of the computer.

Setting Up and Using Your Computer

15