Dell WorkStation 410 manual 2HOO3UHFLVLRQHVNWRS6\VWHPV8VHUV*XLGH

‡A secondary cache of 512 KB of static random-access memory (SRAM) inte- grated in the single-edge contact (SEC) cartridge. The secondary cache also provides error checking and correction (ECC) capability.

‡Dual-processor capability. The system allows the installation of a second SEC car- tridge (operating at the same frequency as the installed microprocessor), which

can be purchased as a kit from Dell. Dual processing improves performance under operating systems that support multiprocessing, such as Microsoft® Win- dows NT® 4.0. Windows 95 does not support dual processing.

‡A 16-bit, integrated Plug and Play Crystal CS4237B audio controller that is Sound Blaster Pro-compatible and that supports the Microsoft Windows® Sound Sys- tem. See Chapter 6, “Using the Integrated Audio Controller,” for details.

‡System memory that can be increased incrementally up to 512 megabytes (MB) using unbuffered synchronous dynamic random-access memory (SDRAM) dual in-line memory modules (DIMMs), or up to 1024 MB using registered SDRAM DIMMS.

The memory subsystem also provides ECC capability, which corrects all single-bit memory errors and detects all multibit errors. See “Adding Memory” in Chapter 9 for details on installing additional memory.

‡Self-Monitoring Analysis and Reporting Technology (SMART) support, which warns you at system start-up if the hard-disk drive has become unreliable. To take advantage of this technology, you must have a SMART-compliant hard-disk drive in the computer. All enhanced integrated drive electronics (EIDE) and small com- puter system interface (SCSI) hard-disk drives shipped with Dell Precision 410 systems are SMART-compliant.

‡The system’s basic input/output system (BIOS), which resides in flash memory and can be upgraded remotely or by diskette if required.

‡Plug and Play capability, which greatly simplifies the installation of expansion cards. Plug and Play support included in the system BIOS allows you to install a Plug and Play expansion card without setting jumpers or switches or performing other configuration tasks. The ISA Configuration Utility (ICU) allows you to config- ure an existing ISA expansion card for conflict-free operation. Also, because the system BIOS is stored in flash memory, it can be updated to support future enhancements to the Plug and Play standard.

NOTE: The Windows NT operating system does not provide ISA Plug and Play support. Therefore, some ISA Plug and Play cards (such as modem, sound, and network cards) may not work with your Windows NT operating system unless you configure them manually.

‡Wakeup On LAN capability, which, when enabled in the System Setup program, allows the system to be started up from a server management console. Wakeup On LAN capability also allows remote computer setup, BIOS upgrades, software downloading and installation, file updates, and asset tracking after hours and on weekends when local area network (LAN) traffic is at a minimum.

‡Universal Serial Bus (USB) capability, which simplifies connection of peripheral devices such as mice, printers, and computer speakers. The USB connectors on the computer’s back panel provide a single connection point for multiple

1-2'HOO￿3UHFLVLRQ￿￿￿￿￿'HVNWRS￿6\VWHPV￿8VHU©V￿*XLGH