18
Front USB Panel
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in "Before You Begin" on page 13. For additional safety best practices information, see the Regulatory Compliance Homepage at dell.com/regulatory_compliance.
Prerequisites
1Remove the computer cover. See "Removing the Computer Cover" on page 23.
2Remove the front bezel. See "Removing the Front Bezel" on page 31.
Removing the Front USB Panel
CAUTION: When sliding the front USB panel out of the computer, be extremely careful. Carelessness may result in damage to the cable connectors and the cable routing clips.
NOTE: Note the routing of all cables as you remove them so that you can
1Disconnect the front USB panel cables from the system board connector F_USB2. See
2Remove the screw that secures the front USB panel to the front panel.
3Slide the front USB panel down to release the clamps from the front panel and pull it away.
Front USB Panel
85
