Replacing the Power Button Module
1Align and push the power button module tabs into the slots on the top panel.
2Connect the power button module cable to the system board connector, F_PANEL. See
Postrequisites
1Replace the top cover. See "Replacing the Top Cover" on page 78.
2Replace the optical drive. See "Replacing the Optical Drive" on page 69.
3Replace the front bezel. See "Replacing the Front Bezel" on page 33.
4Replace the computer cover. See "Replacing the Computer Cover" on page 25.
5Follow the steps in "After Working Inside Your Computer" on page 15.
Power Button Module
91
