REPAIRS
REPLACING THE POWER SUPPLY CABLE
■Unhook the terminal board cover by inserting a screwdriver into the two hooks “A” (fig. 1.2).
■Open the cable gland by unscrewing screw “F” (fig. 1.3), unscrew the terminal screws and remove the cable.
■The new supply cable, of suitable type and section, is connected to the terminal board following the diagram fig. 1.1.
FEEDER CABLE SECTION TYPE
| 3 x 1,5 mm2 |
230 - 240 V
L1
A
Fig. 1.2
N(L2 )
EFig. 1.1
F
Fig. 1.3
7