REPLACING THE OVEN LAMP
WARNING: Ensure the appliance is switched off before replacing the lamp to avoid the possibility of electric shock.
■Let the oven cavity and the heating elements to cool down;
■Switch off the electrical supply;
LEFT LAMP:
■Remove the left sliding shelf and the side catalytic panel by unscrewing the fixing screws (see chapter REMOVING AND REASSEMBLING THE SLIDING SHELVES AND THE CATALYTIC PANELS at page 37).
■Press down from the top the protective cover A (fig. 6.4) and remove it by rotating on the lower side. IMPORTANT: never use screwdrivers or other utensils to remove the cover A. This could damage the enamel of the oven or the lampholder. Operate only by hands.
■Unscrew and replace the bulb B with a new one suitable for high tempera- tures (300°C) having the following specifications:
■Refit the protective cover A operating in reverse order. ATTENTION: the notch in the inner edge of the cover must be oriented toward the lamp.
■Assemble the side catalytic panel and the left sliding shelf.
TOP RIGHT LAMP:
■Remove the protective cover C (fig. 6.4);
■Unscrew and replace the bulb B with a new one suitable for high tempera- tures (300°C) having the following specifications:
■Refit the protective cover;
NOTE: Oven bulb replacement is not covered by your guarantee.
1
A
2 | B | A | B | C |
|
A
Fig. 6.4
39
