DeLonghi EMFPS 60 B manual Semi-Automaticcooking - Only End Of Cooking, 0 00 appear on the display

SEMI-AUTOMATIC COOKING - ONLY END OF COOKING

This automatically switches off the oven after the required cooking time. Two methods of semi-automatic cooking are available:

1ST METHOD: Programming the duration of the cooking

•Set the oven (function and temperature) as indicated in the “USING THE OVEN - COOK- ING FUNCTIONS” chapter.

•Set the duration of the cooking (“hh:mm” - hours and minutes) by pressing button

“ ” (“ : ” symbol flashes on the programmer display) and then button “” to move forward or “ ” to move back if you have gone beyond the required time. Set it

to ten minutes less than the time required because the stored heat will complete the cook- ing.

•“A” letter and “ ” symbol appear on the programmer display; the oven starts to operate immediately and it will switch off automatically at the end of the cooking time (an inter- mittent acoustic signal sounds, the “A” letter and “ ” symbol flash on the programmer display and the oven lamp is lit - press any pushbutton of the programmer [not ON/OFF] to stop the intermittent acoustic signal).

•During cooking press button “ ” (press two times if the oven lamp is not lit - first press lights only oven lamp) to display the remaining duration of the cooking (countdown).

•During cooking press button “ ” (press two times if the oven lamp is not lit - first press lightsonly oven lamp) to displa y the time when cooking will be completed.

•The cooking program can be cancelled at any time as indicated in the "CANCELLING A SET PROGRAMME" chapter.

	Example		2
					3
		1	11	12	1
			10		2
			9		3
			8		4
			7	6	5
CAUTION: after a black-out three zeroes	1	- Time when the oven is programmed (10:00)
	2	- Time necessary to cook the food (2 hours)
"0:00" appear on the display.	3	- Time when cooking will be completed (12:00)

22The semi-automatic cooking is cancelled.