3.Push down on the cuttinghead (C) Fig. 75, with the blade running, as shown.
4.Push the cuttinghead (C) Fig. 76, forward toward the fence, making the cut as shown.
5.Figure 77 illustrates the completed cut. Release the switch trigger and keep the cuttinghead in the down position until the blade (D) comes to a complete stop.
6.After the blade has stopped, raise the cuttinghead
(C) to the up position, as shown in Fig. 78.
C
Fig. 75
C
Fig. 76
D
Fig. 77
C
Fig. 78
26
