Delta R18448 Jetted Shower and Jetted Shower XO Installation, R18222-WS, R18224-WS

1

R18222

3

5

2 1

3

A

4B

R18222-WS

R18224

3 5

2 1

3

A

4 B

R18224-WS

R18442 & R18448

	3
	5
1	2

3

A

4 B

R18442-WS &

R18448-WS

Jetted Shower™ and Jetted Shower XO™ Installation

Description:

Jetted Shower™ valves turn the body jets on and off only. Jetted Shower XO™ valves divert the water to the jets, the showerhead, an extra port or any combination of two, making it a 3 port, 6 function diverter. The black stem extender (without the stop) must be used if using all outlets. If a 2 port, 3 function diverter is desired, jets only, combination jets & showerhead and showerhead only, the plug must be soldered in as shown and the blue stem extender with the stop must be used.

Installation Instructions:

Shut off water supplies. Consider the type and thickness of your finished wall before placing your stringer back plate. Mount the valve to desired height. We recommend 52" from the base of the

enclosure to the center line of the jets. Install the body (1) so the surface of the finished wall is flush with the front of the plasterguard (2), using the two stringer mounting holes (3) on the bracket. Note:

Remove cover (4) to access mounting holes. Make sure the word “UP” (5) is on top of the valve body when installing.

Distance (A) from the stringer to the front of the plasterguard is 2.8" (71 mm). Distance (B) from the stringer to the front of the bonnet is 3.9" (99 mm).

If a thin wall is used, be sure to have the plasterguard behind the wall, otherwise the wall should always be flush with the front of the plasterguard. Note: For thin wall mounting, use included template for hole location.

3