DeviceNet Network Scanner DVPDNET-SL

Status

Explanation

0

No explicit message is sent out.

 

 

1

The communication of explicit message is successful.

 

 

2

The explicit message is being sent out.

3

Error: No response from the target equipment.

 

 

4

Error: Command is invalid.

 

 

5

Error: Size of request message is invalid.

 

 

6

Error: Size of reponse message is invalid.

 

 

7

Error: Failing to establish a connection to the target equipment.

8 ~ 255

Reserved

 

 

3.Notes:

„DVPDNET-SL can only send out 1 explicit message at a time.

„Before sending explicit message by using WPL program, we suggest you clear the request message editing area and response message editing area to 0.

„If the slava responds with standard error code, and DVPDNET-SL also consider the communication being successful, “The communication of explicit message is successful.” will indicate that the communication has been completed successfully.

4.Application example (I)

Target

When M0 = On, read Class 1>>Instance 1>>Attribute 1 of IFD9502

(1) The connection

DVP DNETDV P28SV

RU N

STOP

Node Address:00

DeviceNet

Node Address:02

RJ12

(2)Compulsory settings and explanations on devices „ Compulsory settings in DVPDNET-SL

Parameter

Set value

Explanation

Node address

00

Set the node address of DVPDNET-SL to “00”.

 

 

 

Baud rate

500kbps

Set the communication speed of DVPDNET-SL and bus to

“500kbps”.

 

 

22

DVP-PLC Application Manual

Page 24
Image 24
Delta Electronics DVPDNET-SL manual Node Address00 DeviceNet Node Address02