Denon AVR-2310CI manual 13

Converting Input video signals for Output (Video Conversion Function)

The AVR-2310CI is equipped with four types of video input/output terminals (HDMI, Component video, S-Video and video).

Use the terminals according to the devices to be connected.

This function automatically converts various formats of video signals input to the AVR-2310CI into the format used to output the video signals from the AVR-2310CI to a monitor.

	AVR-2310CI		Monitor
Video device
	Input	Output
Output	(IN)	(MONITOR OUT)	Input
HDMI connector	HDMI connector	HDMI connector	HDMI connector
Component video	Component video	Component video	Component video
connectors	connectors	connectors	connectors
S-Video connector	S-Video connector	S-Video connector	S-Video connector
Video connector	Video connector	Video connector	Video connector
		: When 480i/576i signals are input

•The video conversion function supports the NTSC, PAL, SECAM, NTSC 4.43, PAL-N, PAL-M and PAL-60 formats.

•The resolution of the video signal input to the AVR-2310CI’s HDMI terminal is the resolution set at “Resolution” (vpage 38). (1080p HDMI signals and 1080p component signals are output at 1080p, regardless of the setting.)

										ENGLISH
									Important Information		Getting
		Set as Necessary									Started
	“Video Convert” (vpage 38)
	• Set when using the video conversion function.
	• Set when changing the resolution of the video signal.
											Connections
	“Resolution” (vpage 38)
Resolutions of HDMI-compatible TVs can be checked at “HDMI Information” (vpage 53).
	NOTE										Settings
• HDMI signals cannot be converted into analog signals.
• When a non-standard video signal from a game machine or some other source is input, the video											Playback
	conversion function might not operate.
	format.
• 480p/576p/1080i/720p/1080p component video input signals cannot be converted into S-Video or Video
n Examples of GUI menu											-Multi
• Menu screen			• Status display screen
											Zone
				When the input source is					When the volume is adjusted
				switched							Remote
		M E N U
		A u d i o / V i d e o A d j u s t									Control
		I n f o r m a t i o n
		A u t o S e t u p
		M a n u a l S e t u p
		I n p u t S e t u p
									M a s t e r V o l u m e - 8 0 . 0 d B		Information
					I n p u t	D V D		A u t o
	A d j u s t v a r i o u s a u d i o a n d v i d e o p a r a m e t e r s				M o d e	S T E R E O
			Status display: The operating status is displayed temporarily on the
							screen when the input source is switched or the
							volume is adjusted.				Troubleshooting
											Specifications

10