Denon AVR-2310CI Connecting Devices not, Equipped with HDMI terminals

Connections

The AVR-2310CI allows connection of inputs from up to 5 HDMI devices and output to 1 TV.

DVD	)%.*
Player	065
Blu-ray	)%.*
Disc Player	065
SAT/CABLE	)%.*
Tuner	065

Digital Video )%.*

Recorder 065

Game )%.*

Console 065

Monitor )%.*

(TV) */

•Use a cable on which the HDMI logo is indicated (a certified HDMI product) for connection to the HDMI connector. Normal playback may not be possible when using a cable other than one on which the HDMI logo is indicated (a non-HDMI-certified product).

•When the AVR-2310CI is connected to other devices with HDMI cables, also connect the AVR-2310CI and TV using an HDMI cable.

•When a device supporting Deep Color signal transfer is connected, use a cable compatible with HDMI ver.1.3a.

•Video signals are not output if the input video signals do not match the monitor’s resolution. In this case, switch the Blu-ray Disc player / DVD player’s resolution to a resolution with which the monitor is compatible.

NOTE

•If the menu “HDMI Audio Out” setting (vpage 31) is set to “Amp”, the sound may be interrupted when the monitor’s power is turned off.

•The audio signal from the HDMI output terminal (sampling frequency, number of channels, etc.) may be limited by the HDMI audio specifications of the connected device regarding permissible inputs.

Connecting devices

n Connecting to a device equipped with a DVI-D terminal

When an HDMI/DVI conversion cable (sold separately) is used, the HDMI video signals are converted to DVI signals, allowing connection to a device equipped with a DVI-D terminal.

NOTE

•No sound is output when connected to a device equipped with a DVI-D terminal. Also make the audio connections.

•Signals cannot be output to DVI-D devices that do not support HDCP.

•Depending on the combination of devices, the video signals may not be output.

nSettings related to HDMI connections

Set as necessary. For details, see the respective reference pages.

Input terminal assignment (vpage 37)

Set this when changing the input sources of the different terminals.

HDMI Setup (vpage 31)

Make these settings related to HDMI input/output signals.

•RGB Range

•Auto Lip Sync

•HDMI Audio Out

•HDMI Control

•Standby Source

•Power Off Control

NOTE

The audio signals output from the HDMI connectors are only the HDMI input signals.

			ENGLISH
Connecting Devices not				Getting
Equipped with HDMI terminals
				Started
Monitor (TV)
• Select the terminal to use and connect the device.				Connections
• For video connections, see “Converting input video signals for output
(Video Conversion Function)” (vpage 10).
For instructions on HDMI connections, see “Connecting Devices				Settings
Equipped with HDMI terminals” on page 13.
Monitor (TV)
"6%*0		7*%&0		Playback
015*$"-	7*%&0	4 7*%&0	$0.10/&/5 7*%&0
065	*/	*/	*/
			: 1# 13
				Zone-Multi
				Control Remote
				Information
				Troubleshooting
The component video connectors may be indicated differently on your				Specifications
monitor. For details, see the monitor’s operating instructions.

14