Denon AVR-2310CI manual 37

Setting items				Setting contents
GUI	Format : Set the video signal format to be output for the TV you are
Make the settings related to	using.
displays on the TV screen.	• NTSC : Select NTSC output.
	• PAL : Select PAL output.
	The “Format” can also be set by the following procedure. However,
	the GUI screen is not displayed.
	1. Press����� and��� hold���� o on the main unit and				for at least 3 seconds.
	“Video Format” appears on the display.
	2. Press����� o p and set the video signal format.
	3. Press�����	,	or	to complete the setting.

NOTE

When a format other than the video format of the connected TV is set, the picture will not be displayed properly.

Text : The mode name is displayed when the operation for switching the surround mode, input mode, etc., is performed.

•ON : Turn display on.

•OFF : Turn display off.

Master Volume : Master volume display during adjustment.

•Bottom : Displayed at the bottom of the screen.

•Top : Displayed at the top of the screen.

•OFF : Turn display off.

Tuner Information : This sets the time the GUI menu is displayed when a tuner operation is performed.

•Always : Show display continuously.

•30sec : Show display for 30 seconds after operation.

•10sec : Show display for 10 seconds after operation.

•OFF : Turn display off.

iPod Information : This sets the time the GUI menu is displayed when an iPod operation is performed.

•Always : Show display continuously.

•30sec : Show display for 30 seconds after operation.

•10sec : Show display for 10 seconds after operation.

•OFF : Turn display off.

					ENGLISH
			Making detailed settings (Manual Setup)			Getting
Setting items			Setting contents
Quick Select Name	Rename Label : Change the display name of the selected “Quick Select”					Started
Change the Quick Select	setting.
name.	1. Use ui to select the name of the Quick Select setting you want					Connections
	to change, then press .
	•	Up to 16 characters can be input.
	2. Use o p to set the cursor to the character you want to change.
	3. Use ui to change the character, then press .
	•	The input character type can be switched by pressing			while the
						Settings
		display name is being changed.
	•	The types of characters that can be input are as shown below.
		GUpper case charactersH ABCDEFGHIJKLMNOPQRSTUVWXYZ
		GLower case charactersH abcdefghijklmnopqrstuvwxyz				Playback
		GNumbersH	0123456789 (Space)
		GSymbolsH	! “ # $ % & ‘ ( ) * + , - . / : ; < = > ? @ [ \ ] ^ _ ` { } ˜
	4. Repeat steps 2 and 3 to change the display name.					Multi
Zone Rename	1. Use ui to select the zone name you want to change, then press
Rename the display names		.				-
						Zone
of the different zones as	MAIN ZONE / ZONE2
desired.
	2. Use o p to set the cursor to the character you want to change.					Remote
	3. Use ui to change the character, then press			.
	•	Up to 10 characters can be input.				Control
	•	display name is being changed.			while the
		The input character type can be switched by pressing
	•	The types of characters that can be input are as shown below.				Information
		GUpper case charactersH ABCDEFGHIJKLMNOPQRSTUVWXYZ
		GLower case charactersH abcdefghijklmnopqrstuvwxyz
		GSymbolsH	! “ # $ % & ‘ ( ) * + , - . / : ; < = > ? @ [ \ ] ^ _ ` { } ˜
		GNumbersH	0123456789 (Space)
						Troubleshooting
	4. Repeat steps 2 and 3 to change the display name.
						Specifications

See overleaf

Remote control
	:	Displaying the menu	: Moves the cursor (Up/Down/Left/Right)	: Decision the setting	: Return to previous menu	34
operation buttons		Cancel the menu