Making the audio settings (Audio Setup)
| Default settings are underlined. |
Make settings for audio playback. | |
|
|
Setting items | Setting contents |
|
|
EXT.IN SW Level | +15dB : This is the recommended level. |
Set the playback level of the +10dB / +5dB / 0dB : Select the level according to the player being used. analog subwoofer signals
input from the external input terminals (EXT. IN).
2CH DIRECT/STEREO | Setting : Select the method for setting the speakers used in the |
Make speaker settings for 2- direct and stereo playback modes. | |
channel mode playback. | • Basic : The settings at “Speaker Setup” (vpage 28) are applied. |
• Custom : Make separate settings for
• Large : Use of a large speaker that can adequately play back low frequencies.
• Small : Use of a small speaker that has inadequate playback capacity for low frequencies.
SW : Set the presence of a subwoofer.
• Yes : Use a subwoofer.
• No : Select when a subwoofer is not connected.
SW Mode : Select low range signal to be reproduced by subwoofer.
• LFE : Add the low frequency signal of the channel for which the speaker size is set to “Small” to the subwoofer signal and output it.
• LFE+Main : Add the low frequency signal of all channels to the subwoofer signal and output it.
Crossover : Outputs at below set frequency, each speaker’s bass signal output from the subwoofer.
• 40Hz / 60Hz / 80Hz / 90Hz / 100Hz / 110Hz / 120Hz / 150Hz / 200Hz / 250Hz
Distance FL / Distance FR : Select the speaker you want to set, and set the CH Level. Set the value that is closest to the measured distance.
•0.0ft ~ 60.0ft (12.0ft) / 0.00m ~ 18.00m (3.6m)
CH Level FL/ CH Level FL FR : Select the speaker you want to set, and set the CH Level. Adjust the level of each channel.
•
|
|
| ENGLISH | ||
|
| Making detailed settings (Manual Setup) |
| Getting | |
|
|
| |||
Setting items | Setting contents | ||||
Auto Surround Mode | ON : Memorize settings. Most recently stored surround mode is |
| Started | ||
|
| ||||
Make setting for memorizing | automatically selected. |
|
| ||
surround mode setting for | OFF : Do not memorize settings. Surround mode does not change |
| Connections | ||
each input signal type. | according to input signal. |
| |||
|
| The auto surround mode function lets you store in the memory the |
| ||
|
|
|
| ||
|
| surround mode last used for playing the four types of input signals |
|
| |
|
| listed below. |
|
| |
|
| q Analog and PCM |
| Settings | |
|
| e Dolby Digital and DTS |
| ||
|
| w Dolby Digital and DTS |
|
| |
|
| r |
|
| |
|
|
| Playback | ||
|
| When playing in the PURE DIRECT mode, the surround mode does not |
| ||
|
| NOTE |
|
| |
|
| change even if the input signal is changed. |
| ||
EQ Customize | Audyssey Byp. L/R / Audyssey Flat / Manual |
| |||
|
| ||||
Set so that unused equalizer | • Used |
| Zone | ||
settings | are not displayed | • Not Used |
| ||
when | is used. | NOTE |
| Remote | |
|
|
| |||
|
| • Set so that the “Audyssey Byp. L/R” and “Audyssey Flat” settings can be |
| ||
|
|
|
| ||
|
| made when the Audyssey Auto Setup procedure is performed. |
| Control | |
|
| • Equalizer settings for which “Not Used” is set with the Quick Select |
| ||
|
|
|
| ||
|
| function cannot be stored and called out. |
|
| |
|
|
|
|
| Information |
|
|
|
|
| Troubleshooting |
|
|
|
|
| Specifications |
Remote control |
|
|
|
|
|
| |
| : | Displaying the menu | : Moves the cursor (Up/Down/Left/Right) | : Decision the setting | : Return to previous menu | 32 | |
operation buttons |
|
| Cancel the menu |
|
|
|
|
|
|
|
|
|
|
|
|