Denon AVR-3802 Playing the input source, Example CD, Auto Pcm Dts, Input mode selection function

Playing the input source

1 5

B

	2		3
1	Select the input source to be played.
	Example: CD
	FUNCTION
			CD
			3
	(Main unit)	(Remote control unit)
	To select the input source when REC		SOURCE

MULTI OUT or TUNING PRESET is selected, press the SOURCE button then operate the input function selector.

(Main unit)

2	Select the input mode.
	• Selecting the analog mode
	Press the ANALOG button to switch to the analog input.
	ANALOG
	ANALOG

(Main unit) (Remote control unit)

•Selecting the external input (EXT. IN) mode

Press the EXT. IN (on the EXT. IN button on the remote

control unit) to switch the external input.

EXT.IN

	EXT.IN
(Main unit)	(Remote control unit)

•Selecting the AUTO, PCM and DTS modes

The mode switches as shown below each time the INPUT MODE button is pressed.

AUTO PCM DTS

MODE

(Remote control unit)

•Selecting the AUTO mode

Press the AUTO button to switch to the auto mode.

AUTO

(Main unit)

SETUP			RETURN
	TUNING		A/B
			MEMORY
BAND		MODE
CHANNEL			VOLUME
+	TUNING		+
SKIP	ENTER			4
-	SHIFT		-
SKIP	MUTING
TUNER	PHONO		CD
1	2		3
CDR/ TAPE	VDP		DVD	1
4	5		6
VCR-1	VCR-2 /V.AUX		TV/DBS
7	8		9
TV/	0		+10
VCR
TEST	SPEAKER		OUTPUT
TONE
	SURROUND
DOLBY/DTS	DSP		5CH / 7CH
SURROUND	SIMU.		STEREO	3
6.1 / 7.1	DIRECT		STEREO
SURROUND
	INPUT			2
MODE	ANALOG		EXT.IN
SYSTEM CALL
CALL 1	CALL 2		BACKLIGHT

Input mode selection function

Different input modes can be selected for the different input sources. The selected input modes for the separate input sources are stored in the memory.

qAUTO (auto mode)

In this mode, the types of signals being input to the digital and analog input jacks for the selected input source are detected and the program in the AVR-3802’s surround decoder is selected automatically upon playback. This mode can be selected for all input sources other than PHONO and TUNER.

The presence or absence of digital signals is detected, the signals input to the digital input jacks are identified and decoding and playback are performed automatically in DTS, Dolby Digital or PCM (2 channel stereo) format. If no digital signal is being input, the analog input jacks are selected.

Use this mode to play Dolby Digital signals.

wPCM (exclusive PCM signal playback mode)

Decoding and playback are only performed when PCM signals are being input.

Note that noise may be generated when using this mode to play signals other than PCM signals.

eDTS (exclusive DTS signal playback mode)

Decoding and playback are only performed when DTS signals are being input.

rANALOG (exclusive analog audio signal playback mode)

The signals input to the analog input jacks are decoded and played.

tEXT. IN (external decoder input jack selection mode)

The signals being input to the external decoder input jacks are played without passing through the surround circuitry.

NOTE:

•Note that noise will be output when CDs or LDs recorded in DTS format are played in the “PCM” (exclusive PCM signal playback) or “ANALOG” (exclusive PCM signal playback) mode. Select the AUTO or DTS mode when playing signals recorded in DTS from a laser disc player or CD player.

Note on playing a source encorded with DTS

•Noise may be generated at the beginning of playback and while searching during DTS playback in the AUTO mode. If so, play in the DTS mode.

42