Denon AVR-3802 manual Connecting the antenna terminals, AM loop antenna assembly

Connecting the antenna terminals

DIRECTION OF

BROADCASTING

STATION

AM LOOP ANTENNA (Supplied)

75 Ω /ohms

COAXIAL CABLE

FM ANTENNA ADAPTER (Supplied)

FM ANTENNA

300 Ω /ohms

FEEDER

CABLE

AM OUTDOOR

ANTENNA

FM INDOOR ANTENNA (Supplied)

300 Ω /ohms GROUND

•An F-type FM antenna cable plug can be connected directly.

•If the FM antenna cable’s plug is not of the F-type, connect using the included antenna adapter.

AM loop antenna assembly

FM antenna adapter assembly

12

Remove the vinyl tie and take out the

4connection line.

a.With the antenna

on top any stable

surface.

Connect to the AM antenna terminals.

3

Bend in the reverse direction.

Open the cover

PULL

CLAMP

PULL

ANTENNA ADAPTER

REMOVE

75 Ω /ohms COAXIAL CABLE

SHUT

CLAMP	14mm	19mm
	9mm	14mm
	5mm	5mm

Mount

b. With the antenna attached to a wall.

3C-2V5C-2V

CLAMP

Installation hole Mount on wall, etc.

Connection of AM antennas

1. Push the lever. 2. Insert the conductor. 3. Return the lever.

Note to CATV system installer:

This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the NEC which provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical.

Notes:

•Do not connect two FM antennas simultaneously.

•Even if an external AM antenna is used, do not disconnect the AM loop antenna.

•Make sure AM loop antenna lead terminals do not touch metal parts of the panel.

10