Denon AVR-3802 manual DSP surround simulation, Set the parameters

DSP surround simulation

•To operate the surround mode and surround parameters from the remote control unit.

1	Select the surround mode for the input channel.
		SURROUND
	DOLBY/DTS	DSP	5CH / 7CH
	SURROUND	SIMU.	STEREO
	6.1 / 7.1	DIRECT	STEREO
	SURROUND

(Remote control unit)

The surround mode switches in the following order each time the DSP SIMULATION button is pressed:

C	S/C
2, 4	DISPLAY		MENU
	SURR.		OSD
	PARA.
SETUP			RETURN
		TUNING	A/B
3
			MEMORY
	BAND		MODE
CHANNEL			VOLUME
	+	TUNING	+
	SKIP	ENTER
	-	SHIFT	-
	SKIP	MUTING

TUNER PHONO CD

1 2 3

CDR/ TAPE VDPDVD

WIDE SCREEN MONO MOVIE ROCK ARENA

MATRIX VIDEO GAME JAZZ CLUB

4 5 6

VCR-1 VCR-2 /V.AUX TV/DBS

7 8 9

TV/	0	+10
VCR
TEST	SPEAKER	OUTPUT
TONE

SURROUND

1	DOLBY/DTS	DSP	5CH / 7CH
	SURROUND	SIMU.	STEREO
	6.1 / 7.1	DIRECT	STEREO
	SURROUND

2	SURR.
	PARA.

Display the surround parameter screen on the monitor. The screen for the selected surround mode appears.

(Remote control unit)

3

4

Set the parameters.

	TUNING		TUNING
BAND	MODE	BAND	MODE
	TUNING		TUNING

(Remote control unit)

To end the setting mode, press the surround parameter button again.

SURR.

PARA.

(Remote control unit)

NOTES:

•The surround speaker setting can also be changed with the SPEAKER button on the remote control unit.

•When “Default” is selected and the F courser button is pressed, “CINEMA EQ.” and “D.COMP.” are automatically turned off, “ROOM SIZE” is set to “medium”, “EFFECT LEVEL” to “10”, “DELAY TIME” to “30ms” and “LFE” to “0dB”.

•The “ROOM SIZE” expresses the expansion effect for the different surround modes in terms of the size of the sound field, not the actual size of the listening room.

55