Denon AVR-3802 manual Surround parameters q Pro Logic II Mode, Panorama Mode, Dimension Control

3	Set the surround parameter mode.
	SURROUND
	PARAMETER	SURR.
			Display
		PARA.
			MODE CINEMA
	(Main unit)	(Remote control unit)
	The on-screen display differs according to whether the operation is performed from the
	main unit or the remote control unit.
4	Select the play mode.	TUNING
	SELECT
		BAND	MODE
		TUNING
	(Main unit)	(Remote control unit)
	Display
	MODE CINEMA	MODE MUSIC	MODE PRO LOGIC
5	Select the various parameters. (See “Surround parameters q” for a description of the various parameters.)

SURROUND		TUNING
PARAMETER
	BAND	MODE
		TUNING
(Main unit)	(Remote control unit)
MODE CINEMA	MODE MUSIC	MODE PRO LOGIC
CINEMA EQ	PANORAMA	CINEMA EQ
	DIMENSION
	CENTER WIDTH

When set with the on-screen display using the remote control unit while in the MUSIC mode, set the “ ” mark to “OPTION 0” using the D and H cursor buttons, then press the F cursor button. Press the ENTER button to return to the previous screen.

6	Set the various surround parameters.
	SELECT		TUNING
		BAND	MODE
			TUNING
7	(Main unit)	(Remote control unit)
	When the surround parameters are set using the buttons on

the main unit, stop operating buttons after completing the settings. The settings are automatically finalized and the normal display reappears after several seconds.

When the settings are made using the buttons on the remote control unit, press the SURR. PARA. button to finish.

NOTE:

•There are four Dolby Surround Pro Logic modes (NORMAL, PHANTOM, WIDE and 3CH. LOGIC). The AVR-3802 sets the mode automatically according to the types of speakers set during the system setup process (page 18).

Surround parameters q

Pro Logic II Mode:

The Cinema mode is the standard required mode for all A/V systems.

The Music mode is recommended as the standard mode for autosound music systems (no video), and is optional for A/V systems.

The Pro Logic mode offers the same robust surround processing as original Pro Logic in case the source contents is not of optimum quality.

Select one of the modes (“Cinema”, “Music” or “Pro Logic”).

Panorama Mode:

This mode extends the front stereo image to include the surround speakers for an exciting “wraparound” effect with side wall imaging.

Select “OFF” or “ON”.

Dimension Control:

This control gradually adjust the soundfield either towards the front or towards the rear.

The control can be set in 7 steps from o to 6.

Center Width Control:

This control adjust the center image so it may be heard only from the center speaker; only from the left/right speakers as a phontom image; or from all three front speakers to varying degrees.

The control can be set in 8 steps from 0 to 7.

51