Denon AVR-3802 manual After starting playback, Adjusting the sound quality Tone

After starting playback

[1] Adjusting the sound quality (TONE)

The tone control function will not work in the direct mode.

1	The tone switches as follows each time the TONE CONTROL
	button is pressed.
	TONE
	CONTROL
	BASS	TREBLE
2	(Main unit)
	With the name of the volume to be	SELECT

adjusted selected, turn the SELECT knob to adjust the level.

(Main unit)

•To increase the bass or treble: Turn the control clockwise. (The bass or treble sound can be increased to up to +12 dB in steps of 2 dB.)

•To decrease the bass or treble: Turn the control clockwise. (The bass or treble sound can be decreased to up to –12 dB in steps of 2 dB.)

[2]Listening over headphones

1	Connect the headphones to the	PHONES
	PHONES jack of the front panel.
		1
2	Press the OUTPUT button to play the sound over the
	headphones only.

TV/	0	+10
VCR
OUTPUT			2
TEST	SPEAKER	OUTPUT
TONE
	SURROUND
DOLBY/DTS	DSP	5CH / 7CH
SURROUND	SIMU.	STEREO

•The output to the speaker and pre-out jacks is turned off and no sound is produced from the speakers.

Caution: Switching off the power of the unit and the unit will cancel the settings.

[3] Turning the sound off temporarily (MUTING)

1	Use this to turn off the audio output
	temporarily.	MUTING
	Press the MUTING button.

Cancelling MUTING mode.

Press the MUTING button again.

(Remote control unit)

B

3 2 1

3	If you do not want the bass and treble to be adjusted, turn on
	the tone defeat mode.
	TONE DEFEAT
	The signals do not pass through the
	bass and treble adjustment circuits,
	providing higher quality sound.

B

1

NOTE:

To prevent hearing loss, do not raise the volume level excessively when using headphones.

TUNING

+		+
SKIP	ENTER
-	SHIFT	-
SKIP	MUTING		1
TUNER	PHONO	CD

1 2 3

45