Denon AVR-3802 manual Parameters

2

3

4

ENTER	Switch to the speaker configuration screen.
SHIFT
	Set whether or not speakers are
TUNING	connected and, if so, their size
	parameters.
BAND	MODE
	• To select the speaker
TUNING

• To select the parameter Center Sp.

TUNING

Front Sp.

BANDMODE

Subwoofer

TUNING

Surround Sp. A

Surround back Sp.

Surround Sp. B

ENTER	Press the ENTER button to finalize the setting.
SHIFT

NOTE:

•Select “Large” or “Small” not according to the actual size of the speaker but according to the speaker’s capacity for playing low frequency (bass sound below frequency set for the Crossover Frequency mode and below) signals. If you do not know, try comparing the sound at both settings (setting the volume to a level low enough so as not to damage the speakers) to determine the proper setting.

•Parameters

Large	Select this when using speakers that have sufficient performance for reproducing bass sound below the frequency set for the
	Crossover Frequency mode.
Small	Select this when using speakers that do not have sufficient performance for reproducing bass sound below the frequency set
	for the Crossover Frequency mode. When this is set, bass sound with a frequency below the frequency set for the Crossover
	Frequency mode is sent to the subwoofer.
	When this setting is selected, low frequencies of below the frequency set for the Crossover Frequency mode are assigned
	to the subwoofer.
None……	Select this when no speakers are installed.
Yes/No…	Select “Yes” when a subwoofer is installed, “No” when a subwoofer is not installed.
2spkrs/1spkr	Set the number of speakers to be used for the surround back channel.

If the subwoofer has sufficient low frequency playback capacity, good sound can be achieved even when “Small” is set for the front, center and surround speakers.

For the majority of speaker system configurations, using the SMALL setting for all five main speakers and Subwooofer On with a connected subwoofer will yield the best results.

19