10 SURROUND
Before playing with the surround function
•Before playing with the surround function, be sure to use the test tones to adjust the playback level from the different speakers. This adjustment can be performed with the system setup (see page 25) or from the remote control unit, as described below.
•Adjusting with the remote control unit using the test tones is only possible in the “Auto” mode and only effective in the DOLBY SURROUND and HOME THX CINEMA modes. The adjusted levels for the different modes are automatically stored in the memory.
1 | Press the T. tone button. |
| TUNING | SETUP |
| PARAMETER |
|
|
| SYSTEM |
| SURROUND | |
|
| BAND | TITLE |
| MENU/GUIDE | |
|
|
|
| 2 | ||
|
|
|
| CH SELECT | ||
|
| MODE |
| ENTER | ||
|
|
|
|
| SELECT | |
|
|
| MEMORY | STATUS |
| ON SCREEN |
| T.TONE |
| 1,3 | DISPLAY |
| RETURN |
|
|
|
| |||
|
|
| USE/LEARN T.TONE | MULTI | SPEAKER | DVD |
|
|
|
|
|
| SET UP |
2 | Test tones are output from the different speakers. Use the | 3 |
|
|
|
|
channel volume adjust buttons to adjust so that the volume of | After completing the adjustment, press the T. tone button | |||||
| the test tones is the same for all the speakers. | again. |
|
|
| |
|
|
|
|
|
T.TONE
• After adjusting using the test tones, adjust the channel levels either according to the playback sources or to suit your tastes, as described below.
1 Select the speaker whose level you want to adjust.
CH SELECT
ENTER
| START | LEARNED/TX | |
|
| ||
SYSTEM CALL | POWER |
| |
SET | CALL | OFF | ON / SOURCE |
DVD | VDP | TUNER | SHIFT |
1 2 3
The channel switches as shown below each time the button is pressed.
FL | C | FR | SR | SBR | SBL |
| FADER | SW |
| SL |
|
TV/DBS | V.AUX | PHONO |
4 | 5 | 6 |
CD | MD / | |
7 | 8 | 9 |
| ||
+10 | 0 |
|
VOLUME |
| |
| DOLBY / DTS |
|
HOME THX CINEMA | SURROUND | DIRECT |
DSP SIMULATION | 5CH / 7CH STEREO | STEREO |
CHANNEL
TV/VCR
A / B
DISC SKIP+
MASTER VOL.
INPUT MODE | ANALOG | EXT.IN |
AUDIO | DECK | MD |
|
CD | MULTI | MUTING |
2 | Adjust the level of the selected speaker. |
AVR/AVC | VIDEO | DVD | TV |
|
| VDP | VCR |
|
| SYSTEM |
|
TUNING | SETUP |
|
SURROUND PARAMETER
| BAND | TITLE | MENU/GUIDE |
|
| 2 | |
|
| CH SELECT | |
1 | MODE | ENTER | |
| |||
| SELECT | ||
|
| ||
| MEMORY | STATUS | ON SCREEN |
|
| DISPLAY | RETURN |
| USE/LEARN T.TONE | MULTI SPEAKER | DVD |
|
|
| SET UP |
Select SBR or SBL when “Large” or “Small” is set for “Speaker Configuration”.
When the surround back speaker setting is set to “1spkr” for “Speaker Configuration”, this is set to “SB”.
In the 8ch EXT IN mode, “SBR” is set to “ER”, “SBL” to “EL”.
46