Denon AVR-4800 manual Operation, Clearing learned remote control signals, Before operating

Clearing “learned” remote control signals

1	Press the USE/LEARN selector button with the tip of a pen,
	etc., to set the learn mode.

2	To clear “learned” remote control signals, set the slide switch
	to the position at which the signals were “learned”.
		AUDIO
		AVR/AVC			VIDEO
3	Set the slide switch to the position at which the signals were
	“learned”.
		DECK	MD
	CD					MULTI
		DVD				TV
		VDP		VCR

9 OPERATION

Before operating

1	Refer to “CONNECTIONS” (pages 6 to 15) and check that all
	connections are correct.
2	Set the remote control unit’s slide switch to the AUDIO
	position. (only when operating with the remote control unit)
		AUDIO
		AVR/AVC VIDEO
3	Turn on the power.
	Press the POWER operation switch (button).
	ON / STANDBY
		ON / SOURCE	Lights
			ON/STANDBY
	(Main unit)	(Remote control unit)

•When pressed, the power turns on and the display lights. The sound is muted for several seconds, after which the unit operates normally.

•When pressed again, the power turns off, the standby mode is set and the display turns off.

•Whenever the ON/STANDBY button is in the STANDBY state, the apparatus is still connected to the AC line voltage. Please be sure to unplug the cord when you leave home for, say, a vacation.

4		START	LEARNED/TX
	SYSTEM CALL		POWER
	SET	CALL	OFF	ON / SOURCE
	DVD	VDP	TUNER	SHIFT
	1	2	3
	TV/DBS	V.AUX	PHONO
	4	5	6
	VCR-1	CD	MD / TAPE-1	CHANNEL
	7	8	9
	VCR-2		TAPE-2 MON	TV/VCR
	+10	0		A / B
	VOLUME			DISC SKIP+
		DOLBY / DTS
	HOME THX CINEMA	SURROUND	DIRECT
	DSP SIMULATION	5CH / 7CH STEREO	STEREO
				MASTER VOL.
	INPUT MODE	ANALOG	EXT.IN

2	AUDIO		DECK	MD
			CD	MULTI	MUTING
	AVR/AVC	VIDEO	DVD	TV		3
			VDP	VCR
			SYSTEM		SURROUND
	TUNING		SETUP		PARAMETER

		BAND	TITLE	MENU/GUIDE
				CH SELECT
		MODE		ENTER
				SELECT
		MEMORY	STATUS	ON SCREEN
	1,5		DISPLAY	RETURN
		USE/LEARN T.TONE	MULTI	SPEAKER DVD
				SET UP
4	Press the SYSTEM CALL SET button, and hold it in for at least
	four seconds.

•When both the START and LEARNED/TX LEDs light simultaneously, all the stored codes are cleared.

Lit

SET

5 Press the USE/LEARN selector button.

3

	START	LEARNED/TX	RC-869
				3
SYSTEM CALL		POWER
SET	CALL	OFF	ON / SOURCE
DVD	VDP	TUNER	SHIFT
1	2	3
TV/DBS	V.AUX	PHONO
4	5	6
VCR-1	CD	MD / TAPE-1	CHANNEL
7	8	9
VCR-2		TAPE-2 MON	TV/VCR
+10	0		A / B
VOLUME			DISC SKIP+
	DOLBY / DTS
HOME THX CINEMA	SURROUND	DIRECT
DSP SIMULATION	5CH / 7CH STEREO	STEREO
			MASTER VOL.
INPUT MODE	ANALOG	EXT.IN

2	AUDIO		DECK	MD
			CD	MULTI	MUTING
	AVR/AVC	VIDEO	DVD	TV
			VDP	VCR
			SYSTEM		SURROUND
	TUNING		SETUP		PARAMETER

39