7SETTING UP THE SYSTEM

•Once all connections with other AV components have been completed as described in “CONNECTIONS” (see pages 6 to 15), make the various settings described below on the monitor screen using the AVR-4800’s on-screen display function.

These settings are required to set up the listening room’s AV system centered around the AVR-4800.

•Use the following buttons to set up the system:

AUDIO		DECK	MD
AUDIO		CD	LOCK	MUTING
AVR/AVC	VIDEO	DVD	TV
		VDP	VCR
		SYSTEM		SURROUND
TUNING		SETUP		PARAMETER
BAND		TITLE		MENU/GUIDE
BAND
			CH SELECT
MODE			ENTER
			SELECT
MEMORY		STATUS		ON SCREEN
		DISPLAY		RETURN
USE/LEARN	T.TONE	MULTI	SPEAKER	DVD
				SET UP

SYSTEM SETUP button

Press this to display the system setup menu.

SURROUND PARAMETER button

Press this to display the surround parameter menu.

ENTER button

Press this to switch the display on the screen.

Also use this button to complete the setting on the screen.

CURSOR buttons

and : Use these to move the cursors (0 and 1) to the left and right on the screen.

and : Use these to move the cursors (• and ª) up and down on the screen.

• System setup items and default values (set upon shipment from the factory)

System setup

Default settings

Speaker

Input the combination of speakers in your system and their

Front Sp.

Center Sp.

Surround Sp.

Surround Back Sp.

Sub Woofer

corresponding sizes (SMALL for regular speakers, LARGE for full-

Configuration

size, full-range) to automatically set the composition of the signals

Small

Small / 2spkrs

Yes

output from the speakers and the frequency response.

Use this function when using multiple surround speaker

Surround

DOLBY/

THX

WIDE

5CH/7CH

DSP

—

DTS

EXT. IN

(Surround

combinations for more ideal surround sound. Once the

mode

SURROUND

SCREEN

STEREO

SIMULATION

SURROUND

Speaker

combinations of surround speakers to be used for the

different

surround modes are preset, the surround

Setting)

Surround

speakers

are selected automatically according to the

—

surround mode.

speaker

Subwoofer mode

This selects the subwoofer speaker for playing deep bass signals.

LFE —THX—

THX

Select the operation when the “THX Surround EX” surround

THX Surround EX = ON

Surround EX

parameter is set to “ON”.

This parameter is for optimizing the timing with which the audio

Front L & R

Center

Surround L & R

SBL & SBR

Sub Woofer

Delay Time

signals are produced from the speakers and subwoofer according to

12 ft (3.6 m)

10 ft (3.0 m)

12 ft (3.6 m)

the listening position.

Power Amp

Set this when the power amplifier for the front channels is

Front / Center / Surround

Assignment

switched for use with the surround back channel.

Channel

This adjusts the volume of the signals output from the speakers and

Front L

Front R

Center

Surround

Subwoofer

Back L

Back R

subwoofer for the different channels in order to obtain optimum

Level

effects.

0 dB

Subwoofer

This parameter is for detecting the maximum level of the low bass

signals output from the subwoofer channel in order to protect the

Peak Limiter = OFF

Peak Limit

subwoofer from damage and prevent unpleasant distorted sounds

Lev

from being produced.

Input

DVD

VDP

TV/DBS

VCR-1

VCR-2

V. AUX

TAPE-1

Digital In

This assigns the digital input jacks for the different input

source

Assignment

sources.

Digital

COAXIAL

OPTICAL

Inputs

On Screen

This sets whether or not to display the on-screen display that

appears on the monitor screen when the controls on the remote

On Screen Display = ON

Display

control unit or main unit are operated (from MONITOR 1 outputs

only).

A1 ~ A8

87.5/89.1/98.1/107.9/90.1/90.1/90.1/90.1 MHz

B1 ~B8

520/600/1000/1400/1500/1710 kHz/90.1/90.1 MHz

Auto Tuner

FM stations are received automatically and stored in the memory.

C1 ~C8

90.1 MHz

Presets

D1 ~D8

90.1 MHz

E1 ~E8

90.1 MHz

Denon AVR-4800 manual 7SETTING UP THE SYSTEM

Models: AVR-4800

7SETTING UP THE SYSTEM