Denon AVR-4800 manual Specifications, Audio section, Power amplifier, Rated output, Digital input

17	SPECIFICATIONS
2 Audio section
•	Power amplifier
	Rated output:	Stereo (2ch driven)		(8 Ω
	(All properties shown are only	125	W + 125 W		/ohms, 20 Hz ~ 20 kHz with 0.05% T.H.D.)
	for the power amplifier stage.)	130	W + 130 W	(8 Ω	/ohms, 1 kHz with 0.7% T.H.D.)
		Surround
		125	W x 5 ch (8 Ω	/ohms, 1 kHz with 0.7% T.H.D.)

Dynamic power:

Output terminals:

•Analog

Input sensitivity / input impedance:

Frequency response: S/N:

Distortion:

Rated output/maximum output:

•Digital

D/A output:

Digital input:

•Phono equalizer (PHONO input — REC OUT) Input sensitivity:

RIAA deviation: Signal-to-noise ratio:

Rated output / Maximum output: Distortion factor:

2Video section

•Standard video jacks

Input / output level and impedance: Frequency response:

•S-video jacks

Input / output level and impedance: Frequency response:

•Color component video terminal Input / output level and impedance:

Frequency response:

2Tuner section

Receiving Range:

Usable Sensitivity:

50 dB Quieting Sensitivity:

Signal to Noise Ratio (IHF-A):

Total Harmonic Distortion (at 1 kHz):

2General

Power supply:

Power consumption:

Maximum external dimensions:

Weight:

2Remote control unit (RC-869) Batteries:

External dimensions: Weight:

170 W x 2 ch	(8 Ω	/ohms)
270 W x 2 ch	(4 Ω	/ohms)
350 W x 2 ch	(2 Ω	/ohms)

Front/Center:			6 ~ 16 Ω	/ohms
Surround:		A or B	6 ~ 16 Ω	/ohms
		A + B	8 ~ 16 Ω	/ohms
200 mV /	47 kΩ	/kohms

10 Hz ~ 100 kHz: +0, –3 dB (DIRECT mode) 105 dB (DIRECT mode)

0.005% (20 Hz ~ 20 kHz) (DIRECT mode)

1.2 V / 8 V

Rated output — 2 V (at 0 dB playback)

Total harmonic distortion — 0.005% (1 kHz, at 0 dB)

S/N ratio — 105 dB

Dynamic range — 96 dB

Format — Digital audio interface

2.5 mV

±1 dB (20 Hz to 20 kHz)

74 dB (A weighting, with 5 mV input)

150 mV / 8 V

0.03% (1 kHz, 3 V)

1	Vp-p, 75 Ω	/ohms
5	Hz ~ 10 MHz — +0, –3 dB
Y (brightness) signal			— 1 Vp-p, 75 Ω	/ohms
C (color) signal — 0.286 Vp-p, 75 Ω				/ohms
5	Hz ~ 10 MHz — +0, –3 dB
Y (brightness) signal			— 1 Vp-p, 75 Ω	/ohms
Cb (blue) signal —			0.7 Vp-p, 75 Ω /ohms
Cr (red) signal — 0.7Vp-p, 75 Ω /ohms
5	Hz ~ 20 MHz — +0, –3 dB
[FM] (note: µV at 75 Ω /ohms, 0 dBf = 1 x 10–15 W)					[AM]
87.5 MHz ~ 107.9 MHz					520 kHz ~ 1710 kHz
1.0 µV (11.2 dBf)					18 µV
MONO		1.6 µV (15.3 dBf)
STEREO		23 µV (38.5 dBf)
MONO		80 dB			50 dB
STEREO		75 dB
MONO		0.15%
STEREO		0.3%

AC 120 V, 60 Hz 10.9 A

434 (W) x 181 (H) x 494 (D) mm (17-3/32” x 7-1/8” x 19-29/64”) 21.5 kg (47 lbs 6 oz)

R6P/AA Type (two batteries)

70 (W) x 215 (H) x 24 (D) mm (2-3/4” x 8-15/32” x 15/16”) 200 g (Approx. 7 oz) (including batteries)

* For purposes of improvement, specifications and design are subject to change without notice.

69