Denon AVR-788 Video Conversion Function, On-ScreenDisplay for Component Video Outputs and HDMI Output

Video Conversion Function

•This function automatically converts various formats of video signals input to the AVR-788 into the format used to output the video signals from the AVR-788 to a monitor.

•The AVR-788’s video input/output circuitry is compatible with the following four types of video signals: Digital video signals: HDMI

Analog video signals: Component video, S-Video and Video

GFlow of video signals inside the AVR-788H
Main zone
High picture	HDMI connector	HDMI connector
quality playback
	Component video	Component video	Monitor
	connectors	connectors
	S-Video connector	S-Video connector
	Video connector	Video connector
	Video inputs	Video outputs

•When not using this function, connect a monitor output with the same type of connector as the video input connector.

•The resolution of the HDMI input-compatible monitor connected to the AVR-788 can be checked at menu “Information” – “HDMI Information” (vpage 40).

NOTE

•HDMI signals cannot be converted into analog signals.

•Component input video signals cannot be output to anything other than component video connectors.

•When a non-standard video signal from a game machine or some other source is input, the video conversion function might not operate.

ENGLISH

On-Screen Display for Component Video Outputs and HDMI Output

•When viewing component video signals via the AVR-788, the on-screen display appears when the MENU button or the remote control unit’s DISPLAY button is operated.

•When only component video signals are input to the AVR-788, the characters of the on-screen display are not displayed over the picture.

•The on-screen display signals are not outputted from the HDMI MONITOR OUT.

Troubleshooting Information Zone-Multi Control Remote Playback Setup Connections Started Getting