Denon AVR-788 Speaker Connections, Speaker Connections, Speaker Installation

ENGLISH

Getting	Speaker Connections
Started	Speaker Installation
Connections	The illustration below shows a basic example of installation of the amplifier combined with 8 speakers and
	a monitor.
		Subwoofer				Center speaker
									Surround back speakers
Setup
Playback
Control Remote
-Multi	Front speakers
	Place the front	speakers to	the			Surround speakers
	sides of the monitor or screen and
Zone
	as flush with the screen surface as
Information	possible.
	The table below shows a typical speaker configuration for the AVR-788.
Troubleshooting		FRONT		CENTER	SURROUND		SURROUND BACK			SUBWOOFER
		L	R		L	R	L	R	1 only
	7.1-channels	S	S	S	S	S	S	S	–	S
	(FRONT A+B)
	7.1-channels	S	S	S	S	S	S	S	–	S
	6.1-channels	S	S	S	S	S	–	–	S	S
	5.1-channels	S	S	S	S	S	–	–	–	S
	3.1-channels	S	S	S	–	–	–	–	–	S
	2.1-channels	S	S	–	–	–	–	–	–	S
	2-channels	S	S	–	–	–	–	–	–	–

Speaker Connections

Example: 5.1-channels (FRONT A+B) and ZONE2 use
	Front speakers		Front speakers
Subwoofer		A	B	Center speaker
Subwoofer
with built-in
amplifier	(L)	(R)	(L)	(R)
	w	q w q	w q w	q
*/				w q

b L : Left

R : Right

(L)	(R)	(L)	(R)
w	q w q	w	qw q

Surround speakers	ZONE2 speakers
		ZONE2

When using just one surround back speaker, connect it to the left channel (SBL).

NOTE

By default, the AVR-788’s “Amp Assign” setting is set to “ZONE2”. To use as the surround back speaker for the main zone, change the “Amp Assign” setting (vpage 28).