ENGLISH
StartedGetting | SOURCE SELECT | VOLUME | |
| |||
Connections |
|
| |
Setup | <ZONE2 ON/OFF> |
| |
Playback | <ZONE2/REC SELECT> |
| |
[Front] | [Rear] | ||
Remote | |||
| [ZONE2 ON] | ||
|
| [ZONE2 OFF] | |
Control |
| [MAIN OFF] | |
SOURCE | [MAIN ON] | ||
SELECT | SOURCE | ||
| |||
| SELECT | ||
Zone |
| ||
|
| ||
Information | VOLUME |
| |
|
| ||
| [MUTING] |
| |
Troubleshooting | [MODE |
| |
SELECTOR 2] |
| ||
|
| ||
| [MODE |
| |
| SELECTOR 1] |
|
About the button names in these explanations
<> : Buttons on the main unit
[ ] : Buttons on the remote control unit
Button name only:
Buttons on the main unit and remote control unit
GOperation on the main unitH
Press <ZONE2 ON/OFF>.
When the power turns on, the
GOperation on the remote control unitH
q Set [MODE SELECTOR 1] to “AUDIO” and [MODE SELECTOR 2] to “ZONE2”.
wPress [ZONE2 ON] or [ZONE2 OFF].
When using ZONE2, it is possible to turn the power for the MAIN ZONE only on or off by pressing [MAIN ON] or [MAIN OFF].
Selecting the Input SourceGOperation on the main unitH
qPress <ZONE2/REC SELECT> and select the zone to be adjusted. w Turn <SOURCE SELECT>.
GOperation on the remote control unitH
q Set [MODE SELECTOR 1] to “AUDIO” and [MODE SELECTOR 2] to “ZONE2”.
wPress [SOURCE SELECT].
GOperation on the main unitH
qPress <ZONE2/REC SELECT> and select the zone to be adjusted. w Turn <VOLUME> to adjust.
GOperation on the remote control unitH
q Set [MODE SELECTOR 1] to “AUDIO” and [MODE SELECTOR 2] to “ZONE2”.
wPress [VOLUME].
[Variable range] – – –
•The volume can be increased up to the value set at menu “Manual Setup” – “Zone2 Setup” – “Volume Limit” (vpage 28).
•The ZONE2 volume can be adjusted only when “ZONE2” is selected at menu “Manual Setup” – “Option Setup” – “Amp Assign” (vpage 28).
Turning off the Sound Temporarilyq Set [MODE SELECTOR 1] to “AUDIO” and [MODE SELECTOR 2] to “ZONE2”.
wPress [MUTING].
The sound is reduced to the level set at menu “Manual Setup” – “Zone2 Setup” – “Mute Level” (vpage 28).
To cancel, either adjust the volume or press [MUTING] again. The setting is canceled when the zone’s power is turned off.
The source selected for ZONE2 is also output from the recording output connectors.
NOTE
Digital audio signals input from the COAXIAL, OPTICAL or HDMI connectors cannot be played in
55