Denon AVR-788 Connecting Equipment with HDMI connectors

ENGLISH

Getting	Connecting Equipment with HDMI connectors
	With HDMI connections, the video and audio signals can be transferred with a single cable.
Started	DVD player	Monitor	b The AVR-788 is equipped for HDMI version 1.3a.This version
			is compatible with other versions, allowing connection to
Connections	)%.*	)%.*	all components equipped with an HDMI connector.
	065	*/	b The AVR-788 is compatible with 30- and 36-bit Deep
			Color.
Setup			Compatible	Details	Discs
			audio format		(examples)
			2-channel linear	2ch 32-192 kHz	CD, DVD-Video,
Playback			PCM	16/20/24 bits	DVD-Audio
			linear PCM	16/20/24 bits
			Multi-channel	8ch 32-192 kHz	DVD-Audio
Remote			Dolby Digital, DTS	Bitstream	DVD-Video
Control			Copyright protection system (HDCP)
			In order to play the digital video and audio signals of a DVD-
-Multi			Video or DVD-Audio disc using HDMI/DVI connections, both
			the connected DVD player and monitor must be equipped
			for a copyright protection system		called “HDCP” (High-
Zone			bandwidth Digital Content Protection).
			HDCP is a copy protection technology consisting of data
Information			encoding and mutual identification of the devices.
			The AVR-788 is HDCP-compatible. For details on the DVD
			player or monitor you are using, refer to its operating
			instructions.
Troubleshooting	• To output the sound from the TV, make the settings at menu “Manual Setup” – “HDMI Setup” – “TV”
	• By default, the HDMI audio signals are output from the speakers connected to the AVR-788.
	(vpage 25).

NOTE

•Use a CPPM-compatible DVD player to play DVD-Audio discs that are copyright-protected by CPPM.

•The AVR-788 cannot be controlled from another device via the HDMI cable.

•The audio signals output from the HDMI connector (sampling frequency, bit rate, etc.) may be restricted by the connected device.

•Video signals are not output properly when using devices that are not HDCP-compatible.

•Video signals are not output if the input video signals do not match the monitor’s resolution. In this case, switch the DVD player’s resolution to a resolution with which the monitor is compatible.

•If the menu “Manual Setup” – “HDMI Setup” setting (vpage 25) is set to “AMP”, the sound may be interrupted when the monitor’s power is turned off.

•Use a cable on which the HDMI logo is indicated (a certified HDMI product) for connection to the HDMI connector. Normal playback may not be possible when using a cable other than one on which the HDMI logo is indicated (a non-HDMI-certified product).

•If the monitor or DVD player does not support deep color, deep color signal transfer is not possible.

•If the monitor or DVD player does not support xvYCC, xvYCC signal transfer is not possible.

•When the AVR-788 and DVD player are connected using an HDMI cable, also connect the AVR-788 and monitor using an HDMI cable.

•If the connected monitor or DVD player only has a DVI-D connector, use an HDMI/DVI converter cable. When using a DVI cable, no audio signals are transmitted.

•Use a Deep Color compatible cable for connection to Deep Color compatible devices.

When connecting with an HDMI/DVI converter cable (adapter)

•HDMI video signals are theoretically compatible with the DVI format.

When connecting to a monitor, etc., equipped with a DVI-D connector, connection is possible using an HDMI/DVI converter cable, but depending on the combination of components in some cases the video signals will not be output.

•When connecting using an HDMI/DVI converter adapter, the video signals may not be output properly due to poor connections with the connected cable, etc.

11