ENGLISH

Getting

 

dDolby Digital Setup

 

Set dynamic range for downmix playback of Dolby Digital

Started

 

sources.

 

[Selectable items]

Connections

 

 

 

 

ON

: Compression is used. Select this if sound from front

 

 

 

 

 

speakers is distorted.

 

 

 

 

 

 

OFF

: Do not use compression. This is the recommended setting.

 

 

 

 

Setup

 

• Set this to “ON” if the sound from the front speakers seems

Playback

 

distorted.

• When not using the center speaker or surround speakers, the

 

 

 

playback sound is down-mixed and output from the front speakers.

Control Remote

 

 

 

Zone-Multi

 

 

 

Information

 

 

 

Troubleshooting

 

 

 

 

 

 

 

fAuto Surround Mode

Make setting for memorizing surround mode setting for each input signal type.

[Selectable items]

ON : Memorize settings. Most recently stored surround mode is automatically selected.

OFF : Do not memorize settings. Surround mode does not change according to input signal.

•The auto surround mode function lets you store in the memory the surround mode last used for playing the four types of input signals listed below.

q Analog and PCM 2-channel signals

w Dolby Digital and DTS 2-channel signals e Dolby Digital and DTS multi-channel signals

r Multi-channel signals other than Dolby Digital and DTS (PCM, etc.)

•When playing in the PURE DIRECT mode, the surround mode does not change even if the input signal is changed.

gManual EQ

Adjust tonal quality for each speaker using graphic equalizer.

Base Curve Copy

Copy the Room EQ´s “Audyssey Flat” correction curve.

[Selectable items]

Yes No

“Base Curve Copy” is displayed after the auto setup procedure has been performed.

Adjust CH

Select speaker adjustment method.

[Selectable items]

Each CH : Adjust tonal quality for each speaker separately.

L/R CH : Adjust tonal quality for each L/R speaker pair.

ALL CH : Adjust tonal quality for all speakers together.

Manual EQ

Select the speaker and frequency band and adjust the level.

[Selectable items] 63Hz 125Hz 250Hz 500Hz 1kHz 2kHz 4kHz 8kHz 16kHz

[Variable range] –20dB ~ 0dB ~ +6dB

Default

Resets the settings to the default values.

27