Denon AVR-788 Multi-zone, Connecting the Power Cord, Once Connections are Completed, Turning the Power On (vpage 41)

ENGLISH

Getting	Multi-zone
	ZONE2 out Connections
Started
	If another pre-main (integrated) amplifier is connected, the ZONE2 out connectors can be used to play a
Connections	different program source in ZONE2 at the same time (vpage 52 ~ 55).
	"6%*0
	Pre-main amplifier
	(ZONE2)
Setup	"6%*0
		*/
	-	3
Playback	L	R
ControlRemote	L	R
Zone-Multi
Information
Troubleshooting	"69	Input	Output
	065
				Extension jack for future use.
	Infrared		Infrared
	retransmitter		sensor

NOTE

•For the audio output, use high quality pin-plug cords so that no induction humming or noise is produced.

•For instructions on installing and operating separately sold devices, refer to the respective devices’ operating instructions.

•To conduct multi-zone playback, see “Amp Assign / Multi-zone Connections and Operations” (vpage 52 ~ 55).

Connecting the Power Cord

Wait until all connections have been completed before connecting the power cord.

Power cord	To household
	power outlet
	(AC 120 V, 60 Hz)

Connection to the AC outlets

• These outlets supply power to external audio

devices.

• The power supplied from these outlets turns on

and off together with the set’s power switch.

• Audio equipment with a total power consumption of 120 W (1 A) can be connected.

NOTE

•Insert the AC plugs securely. Incomplete connections could cause noise.

•Only use the AC outlets to plug in audio devices. Do not use them as power supplies for hairdryers or anything other than audio equipment.

Once Connections are Completed Turning the Power On (vpage 41)

17