1-3 Setting the Room EQ Setup

Select the setting of an Equalizer that has been set with Auto Setup or Manual EQ.

1

Select “Room EQ Setup” at the Auto Setup / Room

 

 

EQ Menu.

*AutoSet/RoomEQ Room EQ Setup

(Remote control unit)

2

Display the Room EQ Setup screen.

 

*Room EQ Setup

SurMode:ALL

(Remote control unit)

3

(Remote control unit)

Select All or Assign.

•

All ............

The Equalizer to all Surround mode is set as once.

•

Assign .....

The Equalizer to each surround mode is to set

 

 

individually.

4

(Remote control unit)

When the All is selected and press the ENTER button, display the Select the EQ Curve screen.

Select the Equalizer setting.

•OFF .........The Equalizer is not used.

•Normal ....Adjust the frequency response of all speaker suitable for general surround system.

•Flat ..........Adjust the frequency response of all speakers flat.

This is suitable for music reproduction like ITU-R speaker setting.

•Front........Adjusts the characteristics of each speaker to the characteristics of the front speakers.

•Manual ....Selects the setting value that was set in the Manual EQ setup

NOTES:

*Room EQ Setup RoomEQ Normal

•The Equalizer setting of Normal, Flat and Front can be selected after performing the Auto Setup.

•When the speaker set as “None” with the Auto Setup is change to on manually, the equalizer of “Normal”, “Front” and “Flat” cannot be used.

•The Equalizer setting can be selected by SURROUND PARAMETER button in Main unit or Remote control unit.

•When headphone is connected, the Room EQ cannot be used.

5

Enter the setting.

 

 

The Auto Setup / Room EQ Menu reappears.

(Remote control unit)

26