Fader function

•This function makes it possible to lower the volume of the front channels (FL, C and FR) or the rear channels (SL, SR, SBL and SBR) together. Use it for example to adjust the balance of the sound from each position when multi-channel music sources are played.

1

Select “FADER”.

 

(Remote control unit)

The channel switches in the order shown below each time this button is pressed.

FL C FR SR SBR SBL

FADER SW SL

2

1

2

Press the 0button to reduce the volume

of the front channels, the 1 button to

reduce the volume of the rear channels.

The fader function does not affect the

SW channel.

(Remote control unit)

The channel whose channel level is adjusted lowest can be faded to –12 dB using the fader function.

If the channel levels are adjusted separately after adjusting the fader, the fader adjustment values are cleared, so adjust the fader again.

This is only displayed when setting the fader control.

*Fader Vol .

Front : Rear

Dolby Pro Logic IIx (Pro Logic II) mode

To play in the PL IIx mode, set “Sp.Back” at the Speaker Configuration setting to “1Spkr” or “2Spkrs”. To play in the PL IIx mode, set “Surround Back” at the Power Amp Assign setting.

1

 

 

1

1, 4, 6

 

 

 

3, 5

1

Select the Dolby Pro Logic IIx mode.

 

SELECT

 

(Remote control unit)

(Main unit)

2

Play a program source with the

 

mark.

• For operating instructions, refer

to the

manuals of the

respective components.

The Dolby Surround Pro Logic IIx Cinema or Music mode can be chosen directly by pressing the CINEMA or MUSIC button on the remote control unit during playback in the Dolby Pro Logic IIx mode.

3, 7

4, 5, 6

7

69