NOTE:

Down-converting from the component video signal to the S-Video and composite video signal is not possible, so when not using the component video monitor output terminal connect the player using the S-Video or composite video input terminal.

Cautions on the video conversion function:

When the component video terminals are used to connect the AVR-2805/985 with a TV (or monitor, projector, etc.) and the video (yellow) or S video terminals are used to connect the AVR-2805/985 with a VTR, depending on the combination of the TV and VTR the picture may flicker in the horizontal direction, be distorted, be out of sync or not display at all when playing video tapes.

If this happens, connect a commercially available video stabilizer, etc., with a TBC (time base corrector) function between the AVR- 2805/985 and the VTR, or if your VTR has a TBC function, turn it on.

4

Enter the setting.

The Input Setup Menu reappears.

(Remote control unit)

3-5Auto Tuner Presets

Use this to automatically search for FM broadcasts and store up to 56 stations at preset channels A1 to 8, B1 to 8, C1 to 8, D1 to 8, E1 to 8, F1 to 8 and G1 to 8.

NOTE:

•If an FM station cannot be preset automatically due to poor reception, use the “Manual tuning” operation to tune in the station, then preset it using the manual “Preset memory” operation.

1

Select “Auto Tuner Presets”at the Input Setup Menu.

 

 

*Input Setup

 

Auto Tuner

 

(Remote control unit)

2

Display the Auto Preset Memory screen.

 

(Remote control unit)

*Auto Tuner

Start :Yes

3

(Remote control unit)

Press the CURSOR left button to select “Yes”.

“Search” flashes on the screen and searching begins. “Completed” appears once searching is completed. The display automatically switches to screen.

40