Denon AVR-985 Checking the input signal, NOTE:, NOTE:, 2Dialogue Normalization

3				•	The Dolby Digital indicator lights when playing
	Play a program source with the	,	mark.	Light	Dolby Digital sources.
				• The DTS indicator lights when playing DTS
				Light	sources.
				Light •	Press the SURROUND BACK button.
					Lights when the Surround Back CH is on.
	(Remote control unit)	(Main unit)
				Light
4	Display the surround parameter menu.

(Remote control unit)	(Main unit)
NOTE: The display on	the screen differs depending on

whether you are performing the operation from the main unit or the remote control unit.

5	Select the various parameters.	6	Adjust the parameter settings.	SELECT
	(Remote control unit)	(Main unit)	(Remote control unit)	(Main unit)

2Dialogue Normalization

The dialogue normalization function is activated automatically when playing Dolby Digital program sources.

Dialogue normalization is a basic function of Dolby Digital which automatically normalizes the dialog level (standard level) of the signals which are recorded at different levels for different program sources, such as DVD, DTV and other future formats that will use Dolby Digital.

These contents can be verified with the STATUS and ON SCREEN button.

Display

Dial . Norm

Offset - 4dB

The number indicates the normalization level when the currently playing program is normalized to the standard level.

NOTE:

•When “Default” is selected and the cursor left button is pressed, “CINEMA EQ.” and “D.COMP.” are automatically turned off, “LFE” is reset, and the tone is set to the default value.

Checking the input signal

The input signal can be checked by pressing the remote control unit’s ON

SCREEN button.

SIGNAL:	Displays the type of signal (DTS, DOLBY DIGITAL, PCM, etc.).
fs:	Displays the input signal’s sampling frequency.
		(Remote control unit)
FORMAT: Displays the input signal’s number of channels.
	“Number of front channels/Number of surround channels/LFE on/off”
	“SURROUND” is displayed for 2-channel signal sources recorded in Dolby Surround.
OFFSET:	Displays the dialog normalization offset value.
FLAG:	Displays the special identification signal recorded in the input signal.
	“MATRIX” is displayed when matrix processing is conducted on the surround back
	channel, “DISCRETE” is displayed when discrete processing is conducted.
	Not displayed when no identification signal is recorded.

In addition, screen information is displayed in the following order when the ON SCREEN button is pressed repeatedly:

OSD-1	Input signal
OSD-2	Input/output
OSD-3	Auto surround mode
OSD-3 ~ 9	Tuner preset stations
NOTE:
OSD-3:	This is displayed when the auto surround mode is set to “ON” and the input mode is set to “Auto”.
	It is not displayed when the input mode is set to “Analog” or “EXT. IN”.

73