7 | When the surround parameters are set using the buttons on the main unit, stop operating buttons after completing the settings. The | |
settings are automatically finalized and the normal display reappears after several seconds. | ||
| ||
| When the settings are made using the buttons on the remote control unit, press the “ENTER” or “SURROUND PARAMETER” button to | |
| finish. | |
|
|
NOTE:
•When “Default” is selected and the cursor left button is pressed, “MODE” and “TONE” are automatically reset to the default values and “CINEMA EQ” is set to “OFF”.
This mode is optimum for playing movies. Decoding is performed with emphasis on separation performance to achieve the same atmosphere with
This mode is effective for playing sources recorded in conventional surround formats as well, because the
This mode is suited mainly for playing music. The front channel (FL and FR) signals bypass the decoder and are played directly so there is no loss of sound quality, and the effect of the surround signals output from the center (C) and surround (SL, SR and SB) channels add a natural sense of expansion to the sound field.
CENTER IMAGE (0.0 to 1.0: default 0.3):
The center image parameter for adjusting the expansion of the center channel in the DTS NEO:6 MUSIC mode has been added.
Dolby Digital mode (only with digital input) and DTS Surround mode (only with digital input)
1 | Select the input source. |
Playback with a digital input |
q Select an input source set to digital (COAXIAL/OPTICAL) (see page 37).
FUNCTION
(Remote control unit) | (Main unit) |
wSet the input mode to “AUTO” or “DTS”.
MODE
| 2 4, 5 2, 6 |
(Remote control unit)(Main unit)
2 | Select the STANDARD (Dolby/DTS |
| |
| Surround) mode. |
| When performing this operation from the |
| main unit’s panel, press the SURROUND |
| (Remote control unit) |
| MODE button, then turn the SELECT |
| knob and select Dolby Pro logic IIx or DTS |
| NEO:6. |
| SELECT |
(Main unit) | (Main unit) |
|
|
2
4, 7
5, 6
7
3
1
3
72