4-3 Setting the Auto Surround Mode

The surround mode used at last for the three types of input signals shown below is stored in the memory, and the signal is automatically played with that surround mode the next time it is input.

Note that the surround mode setting is also stored separately for the different input sources.

qAnalog and PCM 2-channel signals (STEREO)

w2-channel signals of Dolby Digital, DTS or other multi-channel format (DOLBY PLIIx cinema)

eMulti-channel signals of Dolby Digital, DTS or other multi-channel format (DOLBY/DTS SURROUND)

Default settings are indicated in ( ).

During playback in the PURE DIRECT mode, the surround mode does not change even if the input signal is changed.

1

Select “Auto Surround Mode” at the Advanced

 

 

Playback Menu.

 

 

*Advanced

Play

 

Auto Surround

2

(Remote control unit)

 

Press the ENTER button.

 

 

Display the Auto Surround Mode screen.

3

(Remote control unit)

 

Select “ON” if you want to use the auto surround

 

mode, “OFF” if you do not want to use it.

 

*Auto Surround

 

ON/OFF:

ON

4

(Remote control unit)

 

Enter the setting.

 

 

 

 

The Advanced Playback Menu reappears.

(Remote control unit)

Contents stored in the auto surround mode can be checked with the on-screen display.

(Remote control unit)

5 Setting the Option Setup

1

Select “Option Setup” at the System Setup Menu.

 

*System Setup

Option Setup

(Remote control unit)

2

Display the Option Setup Menu Screen.

 

 

(Remote control unit)

42