The tone control function will not work in the PURE DIRECT and the DIRECT mode.
1 |
| The tone switches as follows each time | |
| the TONE CONTROL button is pressed. | ||
|
| ||
|
| BASS | TREBLE |
2 | (Main unit) |
|
|
SELECT | With the | name of the volume to be | |
adjusted selected, turn the SELECT knob to adjust the level.
(Main unit)
•To increase the bass or treble: Turn the control clockwise. (The bass or treble sound can be increased to up to +6 dB in steps of 1 dB.)
•To decrease the bass or treble: Turn the control clockwise. (The bass or treble sound can be decreased to up to
1 | Plug the headphone’ plug into the | PHONES |
| ||
| jack. | |
|
| |
| Connect the headphone to the |
|
| PHONES jack. |
|
| The | 1 |
| speaker output) is automatically | |
| turned off when headphone are |
|
connected.
[3] Turning the sound off temporarily (MUTING)1 | Use this to mute the audio output |
| |
| temporarily. |
| Press the MUTING button. |
Cancelling MUTING mode.
2 3 1
3 | If you do not want the bass and treble to |
| |
| be adjusted, turn on the tone defeat |
| mode. |
The signals do not pass through the
(Main unit)bass and treble adjustment circuits, providing higher quality sound.
1
NOTE:
To prevent hearing loss, do not raise the volume level excessively when using headphone.
1
(Remote control unit)
Press the MUTING button again.
1 | Simulcast playback |
Use this switch to monitor a video source other than the audio | |
source. | |
| Press the VIDEO SELECT button, turn the FUNCTION knob |
| until the desired source appears on the display. |
| FUNCTION |
VIDEO |
|
SELECT |
|
(Main unit) | (Main unit) |
Cancelling simulcast playback. |
|
•Select “SOURCE” using the VIDEO SELECT button and the FUNCTION button.
•Switch the program source to the component connected to the video input.
•Press the SOURCE button.
1 | 1 | 1 | 1 |
FUNCTION
VIDEO SOURCE
63