
1
(Remote control unit)
(Main unit)
(Main unit)
On screen display
•Each time an operation is performed, a description of that operation appears
on the display connected to the unit’s |
|
VIDEO MONITOR OUT jack. Also, the |
|
unit’s operating status can be checked |
|
during playback by pressing the remote |
|
control unit’s ON SCREEN button. |
|
Such information as the position of the | 11 |
input selector and the surround | |
parameter settings is output in |
|
sequence. |
|
Front panel display
•Descriptions of the unit’s operations
are also displayed on the front panel display. In addition, the display can be switched to check the unit’s operating status while playing a source by pressing the STATUS button.
1
Using the dimmer function
• Use this to change the brightness of the display.
The display brightness changes in four steps (bright, medium, dim and off) by pressing the main unit’s DIMMER button repeatedly.
1 |
| Press the ZONE2/REC button. |
|
| |
| ZONE |
|
| REC |
|
2 | (Main unit) |
|
| With “RECOUT SOURCE” displayed, | |
|
| |
| FUNCTION | turn the FUNCTION knob to select the |
|
| source you wish to record. |
•When the FUNCTION goes around, it
turn to the “REC” indicator and the indicator of the selected source light.
(Main unit)
3 | Set the recording mode. | ||
| |||
| • For operating instructions, refer to the manual of the | ||
| component on which you want to record. | ||
|
|
| |
4 |
| To cancel, turn the function knob and | |
FUNCTION | select “SOURCE”. | ||
|
(Main unit)
| 2, 4 | 1 | 2 |
|
| |||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
FUNCTION
RECOUT SOURCE
NOTES:
•Recording sources other than digital inputs selected in the REC OUT mode are also outputted from the Zone2 preout jacks.
•Digital signals are not outputted from the analog REC OUT jacks.
64