1-5 Setting the MIC Input Select

•Use this setting when using a microphone other than the included one for measurements when performing the auto setup procedure.

•The microphone included with the AVR-2805 is a measurement microphone designed specifically for use during the auto setup procedure. Select “Mic” and connect the included microphone to the “SETUP MIC” mini-jack. When conducting the auto setup procedure using a separate high performance condenser microphone for measurements, select “V.AUX L” and connect the microphone to the “V.AUX Lch” pin jack.

Please ask the DENON Authorized Service Center about the usable microphone other than the option setup.

1

Select “Mic Input Select” at the Auto Setup / Room EQ Menu.

 

*AutoSet/RoomEQ Mic In Select

(Remote control unit)

2

Display the Mic Input Select screen.

 

3

(Remote control unit)

Select the Mic input jack or V.AUX L jack.

 

 

*Mic In Select

 

Mic

 

(Remote control unit)

4

Enter the setting.

 

 

The Auto Setup / Room EQ Menu reappears.

(Remote control unit)

1-6 Check the EQ parameter

•The frequency characteristic of each speaker is rectified and the tone of the speaker is unified. The EQ parameters that were set in Auto Setup can be checked.

This item is automatically displayed, after the measurement result of the “Auto Setup / Room EQ” is decided.

1

Select “EQ Parameter Check” at the Auto Setup / Room EQ

Menu.

 

*AutoSet/RoomEQ Parameter Check

(Remote control unit)

2

Display the EQ Parameter Check screen.

 

(Remote control unit)

*ParameterCheck

 

1:Normal

28