Denon AVR-985 The Video Conversion Function, NOTE:, MONITOR OUT jacks, Cautions on the video conversion function:

Connecting the video component equipped with Color Difference (Component - Y, PR/CR, PB/CB) Video jacks

•When making connections, also refer to the operating instructions of the other components.

•The signals input to the color difference (component) video jacks are not outputs to the VIDEO output jack (yellow) or the S-Video output jack.

•Some video sources with component video outputs are labeled Y, CB, CR, or Y, Pb, Pr, or Y, R-Y, B-Y. These terms all refer to component video color difference output.

•The function assigned to the component video input can be changed at the system setup. For details, see “Setting the Video Input Mode”. (See page 41)

COMPONENT	DVD player
VIDEO OUT
	B
Y CB CR

Connecting a DVD player

DVD IN jacks

• Connect the DVD player’s color difference (component) video output jacks (COMPONENT VIDEO OUTPUT) to the COMPONENT VIDEO-1 IN jack using 75 Ω /ohms coaxial video pin-plug cords.

	• In the same way, another video source with component video outputs such
	as a TV/DBS tuner, etc., can be connected to the VIDEO-2 color difference
	(component) video jacks.
	Monitor TV
COMPONENT	Connecting a monitor TV
VIDEO IN	MONITOR OUT jack
Y CB CR
	• Connect the TV’s color difference (component) video input jacks
	(COMPONENT VIDEO INPUT) to the COMPONENT MONITOR OUT
	jack using 75 Ω /ohms coaxial video pin-plug cords.

The Video Conversion Function

With the AVR-2805/985, the Video signal and the S-video signal which were inputted are converted mutually. And also the Video signal and the S-Video signal which were inputted are converted into a higher quality.

This unit’s input jacks	The flow of the This unit’s output jacks
	this unit’s internal
	signals.
(Color Diffrence Video jack)	(Color Diffrence Video jack)
(S-Video jack)	(S-Video jack)
(Video jack)	(Video jack)

•The color difference input jacks may be indicated differently on some TVs, monitors or video components (“CR, CB and Y”, “R- Y, B-Y and Y”, “Pr, Pb and Y”, etc.). For details, carefully read the operating instructions included with the TV or other component.

MONITOR OUT jacks

The AVR-2805/985 is equipped with a function for up-converting video signals.

Because of this, the AVR-2805/985’s MONITOR OUT jack can be connected to the monitor (TV) with a set of cables offering a higher quality connection, regardless of how the player and the AVR- 2805/985’s video input jacks are connected.

Generally speaking, connections using the component video jacks offer the highest quality playback, followed by connections using the S-Video jacks, then connections using the regular video jacks (yellow).

NOTE:

Down-converting from the component video signal to the S-Video and composite video signal is not possible, so when not using the component video monitor output terminal connect the player using the S-Video or composite video input terminal.

Cautions on the video conversion function:

When the component video terminals are used to connect the AVR- 2805/985 with a TV (or monitor, projector, etc.) and the video (yellow) or S video terminals are used to connect the AVR-2805/985 with a VTR, depending on the combination of the TV and VTR the picture may flicker in the horizontal direction, be distorted, be out of sync or not display at all when playing video tapes.

If this happens, connect a commercially available video stabilizer, etc., with a TBC (time base corrector) function between the AVR-2805/985 and the VTR, or if your VTR has a TBC function, turn it on.

9