3

(Remote control unit)

Select the desired setting.

Variable:

The level can be adjusted freely using the buttons on the remote control unit.

0 dB, -40 dB:

The output level is fixed at the set level and the volume can no longer be adjusted.

NOTE:

When “ZONE2” is selected at System Setup Menu “5- 1.Power Amp Assign”, the Zone2 vol. Level is all set to “Variable” including preout level and this menu is not displayed.

*Zone2 Vol . Lev .

Variable

4

Enter the setting.

The Option Setup Menu reappears.

 

(Remote control unit)

5-3,5-4Setting the Trigger Out Setup

Set the Trigger Out output 1 for the different input sources.

1

Select “Trigger Out 1 Setup” at the Option Setup

 

 

Menu.

 

 

*Option

Setup

 

Trigger

Out 1

 

(Remote control unit)

 

2

Display to the Trigger Out 1 Setup screen.

 

 

 

(Remote control unit)

 

 

*Trigger

Out 1

 

ZONE :

MAIN

3

Select the Zone (MAIN or Zone2).

 

(Remote control unit)

4 q Select the input source.

w Select “ON” or “OFF”.

 

(Remote control unit)

(Remote control unit)

5

Enter the setting

 

The Option Setup

Menu reappears.

 

(Remote control unit)

Set the Trigger out 2 Setup in the same way.

44