(3) Using the system call function

1

Press the button at which the system call signals have been stored.

 

 

• The stored signals are transmitted successively.

 

 

Punch Through(1)Punch through button

Buttons used in the CD, CDR/MD, TAPE, DVD/VDP, and VCR modes can be assigned to the buttons shown on the diagram at the right which are not normally used in the TV and DBS/CABLE modes.

For example, when the CD mode is set to the punch through mode in the TV mode, the CD mode’s PLAY, STOP, MANUAL SEARCH, AUTO SEARCH, PAUSE and DISC SKIP buttons’ signals are sent in the TV mode.

(2)Making the punch through setting

1

Press the power ON/SOURCE button and

 

 

the OFF button at the same time.

 

The LEARNED/TX indicator flashes.

2

Press the 1(play) button.

TV and DBS/CABLE mode buttons and

LEARNED/TX indicator flash.

3

Press the mode button of the equipment

 

 

for which Punch Through is to be set.

 

The CD, CDR/MD, TAPE, DVD/VDP,

 

and VCR mode buttons and

4

LEARNED/TX indicator will flash.

Press the mode button of the equipment that is to be

 

 

punched through.

The mode button that was set will light.

1 1

4

3

2

(1)

55