Playback Setup Connections Started Getting

Front

Select front speaker size.

[Selectable items]

Large Small : Select front speaker size.

Subwoofer

Select subwoofer use.

[Selectable items]

Yes

 

No

: Select subwoofer use.

 

 

 

 

Subwoofer Mode

Select low range signal to be reproduced by subwoofer.

dDolby Digital Setup

Set dynamic range for downmix playback of Dolby Digital sources.

[Selectable items]

ON : Compression is used. Select this if sound from front speakers is distorted.

OFF : Do not use compression. This is the recommended setting.

•Set this to “ON” if the sound from the front speakers seems distorted.

•When not using the center speaker or surround speakers, the playback sound is down-mixed and output from the front speakers.

gManual EQ

Adjust tonal quality for each speaker using graphic equalizer.

Base Curve Copy

Copy the Room EQ´s “Audyssey Flat” correction curve.

[Selectable items]

Yes

 

No

 

 

 

 

“Base Curve Copy” is displayed after the auto setup procedure has been performed.

Adjust CH

Select speaker adjustment method.

Troubleshooting Information Zone-Multi Control Remote

[Selectable items]

LFE LFE+Main : Select subwoofer signal.

Crossover

Select crossover frequency from which subwoofer handles low range signal.

[Selectable items]

40Hz 60Hz 80Hz 90Hz 100Hz 110Hz 120Hz 150Hz

200Hz 250Hz : Select crossover frequency.

Distance FL

Set distance from listening position to front left speaker.

[Variable range]

0.0ft ~ 60.0ft

 

 

Distance FR

Set distance from listening position to front right speaker.

[Variable range]

0.0ft ~ 60.0ft

 

 

fAuto Surround Mode

Make setting for memorizing surround mode setting for each input signal type.

[Selectable items]

ON : Memorize settings. Most recently stored surround mode is automatically selected.

OFF : Do not memorize settings. Surround mode does not change according to input signal.

•The auto surround mode function lets you store in the memory the surround mode last used for playing the four types of input signals listed below.

q Analog and PCM 2-channel signals

w Dolby Digital and DTS 2-channel signals e Dolby Digital and DTS multi-channel signals

r Multi-channel signals other than Dolby Digital and DTS (PCM, DSD, etc.)

•When playing in the PURE DIRECT mode, the surround mode does not change even if the input signal is changed.

[Selectable items]

Each CH : Adjust tonal quality for each speaker separately.

L/R CH : Adjust tonal quality for each L/R speaker pair.

ALL CH : Adjust tonal quality for all speakers together.

Manual EQ

Select the speaker and frequency band and adjust the level.

[Selectable items] 63Hz 125Hz 250Hz 500Hz 1kHz 2kHz 4kHz 8kHz 16kHz

[Variable range]

 

 

~

 

–20dB

~

0dB

+6dB

 

 

 

 

 

 

Default

Resets the settings to the default values.

29