Playback Setup Connections Started Getting
Specifications
nAudio section
• Power amplifier
Rated output: | Front (A, B): |
|
| 110 W + 110 W | (8 Ω/ohms, 20 Hz ~ 20 kHz with 0.05 % T.H.D.) |
| 140 W + 140 W | (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.) |
| Center: |
|
| 110 W (8 Ω/ohms, 20 Hz ~ 20 kHz with 0.05 % T.H.D.) | |
| 140 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.) | |
| Surround: |
|
| 110 W + 110 W | (8 Ω/ohms, 20 Hz ~ 20 kHz with 0.05 % T.H.D.) |
| 140 W + 140 W | (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.) |
| Surround Back: |
|
nVideo section
•Standard video terminals
Input / output level and impedance: Frequency response:
•
Input / output level and impedance: Frequency response:
•Color component video terminal Input / output level and impedance:
1
5 Hz ~ 10 MHz — +0,
Y (brightness) signal — 1
Y (brightness) signal — 1
PR / CR signal — 0.7
Troubleshooting Information
| 110 W + 110 W (8 Ω/ohms, 20 Hz ~ 20 kHz with 0.05 % T.H.D.) | ||
| 140 W + 140 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.) | ||
Dynamic power: | 120 W x 2ch (8 Ω/ohms) |
| |
| 170 W x 2ch (4 Ω/ohms) |
| |
Output terminals: | Front: | A or B | 6 ~ 16 Ω/ohms |
|
| A + B | 8 ~ 16 Ω/ohms |
| Center, Surround, Surr. Back: | 6 ~ 16 Ω/ohms | |
• Analog |
|
|
|
Input sensitivity / Input impedance: | 200 mV / 47 kΩ/kohms |
| |
Frequency response: | 10 Hz ~ 100 kHz — +1, | ||
S/N: | 102 dB (DIRECT mode) |
| |
Distortion: | 0.005 % (20 Hz ~ 20 kHz) (DIRECT mode) | ||
Rated output: | 1.2 V |
|
|
• Digital |
|
|
|
D/A output: | Rated output — 2 V (at 0 dB playback) | ||
| Total harmonic distortion — 0.008 % (1 kHz, at 0 dB) | ||
| S /N ratio — 102 dB |
|
|
| Dynamic range — 96 dB |
| |
Digital input: | Format — Digital audio interface |
| |
• Phono equalizer (PHONO input — REC OUT) |
|
| |
Input sensitivity: | 2.5 mV |
|
|
RIAA deviation: | ±1 dB (20 Hz to 20 kHz) |
| |
S/N: | 74 dB (A weighting, with 5 mV input) | ||
Rated output: | 150 mV |
|
|
Distortion factor: | 0.03 % (1 kHz, 3 V) |
|
|
Frequency response:5 Hz ~ 100 MHz — +0,
nTuner section |
| [FM] | [AM] |
| (note: µV at 75 Ω/ohms, 0 dBf = 1 x |
| |
Receiving Range: | 87.5 MHz ~ 107.9 MHz | 520 kHz ~ 1710 kHz | |
Usable Sensitivity: | 1.0 µV (11.2 dBf) | 18 µV | |
50 dB Quieting Sensitivity: | MONO | 1.6 µV (15.3 dBf) |
|
| STEREO | 23 µV (38.5 dBf) |
|
S/N | MONO | 77 dB |
|
| STEREO | 72 dB |
|
Total harmonic Distortion (at 1 kHz): | MONO | 0.15 % |
|
| STEREO | 0.3 % |
|
nGeneral |
|
|
|
Power supply: | AC 120 V, 60 Hz |
| |
Power consumption: | 6.0 A |
|
|
| 0.3 W (Standby) |
| |
Maximum external dimensions: | 434 (W) x 171 (H) x 427 (D) mm | ||
Weight: | 13.2 kg (29 lbs 1.6 oz) |
|
nRemote control unit
Batteries: | R6P/AA Type (two batteries) | |
Maximum external dimensions: | 52 (W) x 243 (H) x 21 | (D) mm |
Weight: | 184 g (Approx 6.5 oz) | (including batteries) |
z For purposes of improvement, specifications and design are subject to change without notice.
71