Playback Setup Connections Started Getting

EFFECT

Switch effect signal for multi-surround speakers on and off.

When “EFFECT” is set to “ON”, a surround effect with a strong sense of expansion is achieved.

[Selectable items]

ON

 

OFF

LEVEL

Adjust effect signal level.

[Variable range] 1 ~ 10 ~ 15

Set to a lower level if the positioning and sense of phase of the

Some Dolby Digital EX sources do not include EX flags. If the playback mode does not switch automatically even when “AFDM” is set to “ON”, set “SB CH OUT” to “MTRX ON” or “PLIIx CINEMA”.

SB CH OUT (for Multi-channel sources)

Select playback mode for surround back channels.

[Selectable items]

OFF

:

No signal is played from the surround back

 

 

channels.

NON MTRX

:

The same signals as those of the surround

 

 

channels are output from the surround back

 

 

channels.

SB CH OUT (for 2-channel sources)

Determine whether to use surround back speakers.

[Selectable items]

ON : The surround back channel signal is played.

OFF : The surround back channel signal is not played.

This operation can be performed directly pressing the SURROUND BACK button on the main unit.

SW ATT

Attenuate subwoofer level when using EXT. IN mode.

Zone-Multi Control Remote

surround signals seems unnatural.

ROOM SIZE

Determine size of acoustic environment.

[Selectable items]

small : Simulate acoustics of a small room. med. s

medium

med. l

MTRX ON

PLIIx CINEMA

PLIIx MUSIC

ES MTRX

ES DSCRT

:The surround channel signals undergo digital matrix processing and are output from the surround back channels.

z1 : Decoded in Dolby Pro Logic IIx Cinema mode, surround back signal played.

z2 : Decoded in Dolby Pro Logic IIx Music mode, surround back signal played.

z3 : DTS signal played with digital matrix processing.

z4 : Signal included in DTS-ES Discrete 6.1-channel sources played.

[Selectable items]

ON : The input from the subwoofer channel is attenuated.

OFF : The input from the subwoofer channel is not attenuated. Usually use in this mode.

Set this to “ON” if the subwoofer channel level seems too high when playing Super Audio CD.

Subwoofer

Troubleshooting Information

large : Simulate acoustics of a large room.

NOTE

“ROOM SIZE” does not indicate the size of the room in which sources are played.

AFDM (Auto Flag Detect Mode)

Auto-select surround mode by source.

This function only works for software containing a special identification signal.

If the software being played is recorded in Dolby Digital EX or DTS-ES, it is played in 6.1-channels. If not, it is played in 5.1-channels.

[Selectable items]

ON

 

OFF

Example : Playing Dolby Digital software (with EX flag)

•When “AFDM” is set to “ON”, the surround mode is automatically set to the DOLBY D + PLgx C mode.

•To play in the DOLBY DIGITAL EX mode, set “AFDM” to “OFF” and “SB CH OUT” to “MTRX ON”.

DSCRT ON

:

Mode for discrete playback of surround back

 

 

signals included in 7.1-channel digital discrete

 

 

audio signals (DVD, etc.).

z1: This can be selected when “Surround Back” is set to “2spkrs” at the menu “Manual Setup” – “Speaker Setup” – “Speaker Configuration” setting (vpage 26).

z2: This can be selected when “Surround Back” is set to “2spkrs” or “1spkr” at the menu “Manual Setup” – “Speaker Setup” – “Speaker Configuration” setting.

z3: This can be selected when playing DTS sources.

z4: This can be selected when playing DTS sources including a discrete 6.1-channel signal identification signal.

Turn subwoofer output on and off.

[Selectable items]

ON : The subwoofer is used.

OFF : The subwoofer is not used.

Default

Resets the settings to the default values.

39