hTrigger Out

Select the conditions to turn on the trigger out with respect to the zone, input source, surround mode. For details about the trigger out function, see page 19.

Select “Trigger Out 1” or “Trigger Out 2” and make the settings below respectively.

[Selectable items]

ON : Activate trigger on this mode.

–– – : Do not activate trigger on this mode.

jRemote ID Setup

Set remote control ID.

[Selectable items]

1

 

2

 

3

 

4

NOTE

When using the AVR-988 with only the included remote control unit (RC-1069), there is no need to make settings.

When using a separately sold remote control unit (RC-7000CI, etc.), this function can be used. Match the ID setting of the remote control unit and the receiver.

lDisplay

Adjust display brightness of the receiver.

[Selectable items]

Bright : Normal display brightness.

Dim : Reduced display brightness.

Dark : Very low display brightness.

OFF : Display is off unless controls are operated.

Operating from the main unit

Setup Connections Started Getting

Setting with Respect to the Zone

 

 

k2Way Remote

• When the power of the zone turned on/off, the trigger out turns on.

• Associated with the power supply of zones set to “ON”.

Make setting for 2-way remote control unit.

 

 

 

Press the DIMMER button.

Bright Dim

OFF Dark

Playback

Setting with Respect to the Input Source

•When the input source set to on is selected, the trigger out turns on.

•Associated with respect to the input source for zones set to “ON” at “Setting with Respect to the Zone”.

Setting with Respect to the Surround Mode

•When the surround mode set to on is selected, the trigger out turns on.

•Associated with respect to surround modes that are set to “ON”.

•This can be set if the “MAIN ZONE” setting at “Setting with Respect to the Zone” is set to “ON”.

•Associated when an input source for which “Setting with Respect to the Input Source” is set to “ON” is selected.

[Selectable items]

Used : Use 2-way remote control.

Not Used : Do not use 2-way remote control.

When using a 2-way remote control unit (RC-7000CI and RC-7001RCI, sold separately), set this to “Used”.

A0Setup Lock

Protect settings from inadvertent change.

[Selectable items]

ON : Turn protection on.

OFF : Turn protection off.

•When “Setup Lock” is set to “ON”, the settings listed below can no longer be changed. Also, “SETUP LOCKED!” is displayed if you attempt to operate related buttons.

⋅Menu operations

⋅RESTORER

⋅Night Mode

⋅Parameter

⋅Room EQ

⋅Channel Level

⋅Audio Delay

•To cancel the setting, press the MENU button to re-display the “Setup Lock” screen, then change the setting to “OFF”.

Troubleshooting Information Zone-Multi Control Remote

32