Troubleshooting Information Zone-Multi Control Remote Playback Setup Connections Started Getting

SOURCE SELECT

<SOURCE> <TUNING PRESET> MASTER VOLUME

<ON/STANDBY> <PHONES>

SPEAKER

<POWER>

 

[POWER ON]

 

[CHANNEL]

 

[POWER OFF]

 

[SHIFT]

[TUNER]

[TUNER]

SOURCE

SOURCE

SELECT

SELECT

 

MASTER

[TUNING]

[MODE]

VOLUME

[BAND]

[MUTING]

[MEMORY]

SPEAKER

 

[MODE

 

SELECTOR 1]

 

[MODE

 

Playback

Preparations

Turning the Power On

1Press <POWER>.

The power indicator lights red and the power is set to the standby mode.

2Press <ON/STANDBY> or [POWER ON].

The power indicator flashes green and the power turns on.

Turning the Power Off

qPress <ON/STANDBY> or [POWER OFF]. The power is set to the standby mode.

wPress <POWER>.

The power indicator turns off, and so does the power.

NOTE

Power continues to be supplied to some of the circuitry even when the power is in the standby mode. When leaving home for long periods of time or when traveling, either press <POWER> to turn off the power, or unplug the power cord from the power outlet.

Selecting the input source

Operation on the main unit

Turn <SOURCE SELECT>.

Operations During Playback

Adjusting the Master Volume

Either turn <MASTER VOLUME> or press [MASTER VOLUME].

Turning Off the Sound Temporarily (Muting)

Press [MUTING].

To cancel, press [MUTING] again. Muting can also be canceled by adjusting the master volume.

Listening with Headphones

Plug the headphones into <PHONES>.

The sound from the speakers and pre-out connectors is automatically cut.

NOTE

Be careful not to set the volume too high when using headphones.

Switching the front speakers

Press SPEAKER.

Front A

 

Front B

 

Front A+B

SELECTOR 2]

About the button names in these explanations

<> : Buttons on the main unit

[ ] : Buttons on the remote control unit

Button name only:

Buttons on the main unit and remote control unit

If “Rec Select” or “Video Select” is selected for the input source, press <SOURCE> before turning <SOURCE SELECT>.

Operation on the remote control unit

Set [MODE SELECTOR 1] to “AUDIO” then press [SOURCE SELECT].

The desired input source can be selected directly.

43